RI Title
RI logo

RI7100A

  1. Home
  2. Products

Browse Kits

Parts List


LIMITED AVAILABILITY

This item will not be restocked when depleted and should be avoided for new designs.
This product entered limited availablity on 06/01/2011. View RIKs with Limited Availability for a complete list.

Suggested Replacement: CASSINI

Expiration Reason: Next generation modular ATE improves on all RI7100A functionality.

Aditional replacements may be found by searching for RI7100A (change the REV letter) or RFIC ATE System.

RFIC ATE System

High Repeatablility, 3+ rack TIMs, Legacy Application Testing

Part Number: RI7100A


tiny RI 7100AThe RI7100A ATE System was a configurable and extremely capable tester for a wide variety of IF, RF, and Microwave devices from 5 kHz up to 20 GHz. From simple Power Amplifiers and LNAs to complete Transceivers and Systems, testing is accomplished through a universal Test Head interface. Custom fixtures adapt the DUT, which can be on wafer, packaged or modules, to the RI universal device interface. RI7100A System Options can be factory installed at the time of purchase, or upgraded anytime at a customer’s site.

Customizing the RI7100A involves considering the following:
The number and type of power supplies needed.
The number and type of RF signals that need to be applied.
The power level of the RF signals to be applied.
The expected device RF output power.
The number and type of any digital control to be applied.


Download the RI7100A Performance Summary
RI7100A Performance Summary 10_30_06.pdf

Details
Measurement Capability
General Information
System Characteristics (pictures)
Support Components
Download the RI7100A White paper
RI7100A Whitepaper.pdf

Measurement Capability

The RI 7100A IFIC/RFIC ATE is a fully automatic IFIC/RFIC test system designed to test devices as simple as two port LNAs to integrated RF receivers with multiple frequency conversions, IQ modulators, frequency dividers, phase detectors, RSSI circuits, multiple gain steps, T/R switches, multiple biases, multiple I/O ports, and more.


Show details for S Parameters (<0.1 GHz to >8 GHz)S Parameters (<0.1 GHz to >8 GHz)
Show details for Dynamic Range: >75 dB instantaneousDynamic Range: >75 dB instantaneous
Show details for Noise Figure (40 msec)Noise Figure (40 msec)
Show details for RF Power (< 100 usec)RF Power (< 100 usec)
Show details for Third Order Intercept (< 100 msec)Third Order Intercept (< 100 msec)
Show details for 1 dB Compression (< 25 msec)1 dB Compression (< 25 msec)
Hide details for Spurious (-75 dBc in < 40 msec)Spurious (-75 dBc in < 40 msec)

RF spurious level and frequency measurements of known signals to -75 dBc are made in less than 40 msec with the RI System Receiver.


Show details for Harmonics (-50 dBc in < 40 msec)Harmonics (-50 dBc in < 40 msec)
Show details for RF and DC Pulsed Capability (35 usec pulse widths)RF and DC Pulsed Capability (35 usec pulse widths)


RI 7100A IFIC/RFIC ATE General Information

The RI 7100A offers a flexible and expandable measurement platform. As your requirements expand and change, the RI 7100A will expand in performance and feature set to meet the new requirements.


Show details for Calibration TypesCalibration Types
Show details for Fast Test Plan Generation using the RI Graphical Test Plan Builder/EditorFast Test Plan Generation using the RI Graphical Test Plan Builder/Editor
Show details for Test System ControllerTest System Controller
Show details for Multiple Limit FilesMultiple Limit Files
Show details for Test Plan Optimizer - Reduces Test TimesTest Plan Optimizer - Reduces Test Times
Show details for Test Executive and Test Executive EditorTest Executive and Test Executive Editor
Show details for Simultaneous Execution of Multiple Test Plans and Limit FilesSimultaneous Execution of Multiple Test Plans and Limit Files
Show details for Multiple Data ViewersMultiple Data Viewers
Show details for Data Logger Offers Multiple Data FormatsData Logger Offers Multiple Data Formats
Show details for Data Base Client Upgrade - Networking the Tester to Your Data BaseData Base Client Upgrade - Networking the Tester to Your Data Base
Show details for Multitasking Operating SystemMultitasking Operating System
Show details for S Parameter Auto-InterpolationS Parameter Auto-Interpolation
Hide details for RI Programmable DUT ControllerRI Programmable DUT Controller

The RI Programmable DUT Controller provides the DC & pulsed bias, analog stimulus & measurement and the digital interface between the DUT and the System Computer. The RI DUT Controller is custom configured to each user's specific needs. Roos Instruments offers several plug-in application functions including:

  • High Current Bias Supply Lines: 0 to 10 Vdc; 3.5 Amps max. per line, 35 us min pulse width.
  • 6 Amp Current Bias Supply Lines: 0 to 10 Vdc; 6 Amps max per line, 35 us min pulse width.
  • Medium Current Bias Supply Lines: < + 12 Vdc; 200 mA max. per line.
  • Device Power Lines 1 - 8: 8 lines to 4 States (2 Medium Current Bias Supplies, an open or gnd.)
  • Device Power Lines 9 thru 16: 8 lines to 3 States (2 Medium Current Bias Supplies or an open.)
  • DUT Control Lines: Bi-State Levels, < + 10 Vdc.
  • Add Current Measurement Capability to the DUT Control Lines: Adds VCCs 7 and 8.
  • DC Voltage Measurement Lines: 12 bit Resolution.
  • Low Noise Clock Output: Divides RF Input Signal by 64, Buffers & Outputs the Resulting Signal.
  • Base Band Digitizer: Measures S/N, SINAD, Distortion, Rise/Fall, Timing, etc.
  • Dual Output Arbitrary Waveform Synthesizer: 2 Analog & 2 Digital Outputs, DC to 10 MHz.
  • Digital Frequency Counter : Measures BER and counts Digital Waveform Pulses to >1 Megabit rates.
Note: Plug-in modules can be added to the test system at any time.

Show details for Dual Output Arbitrary Waveform SynthesizerDual Output Arbitrary Waveform Synthesizer
Show details for RF Test Ports (Expandable from 4 to 12 or more RF Ports)RF Test Ports (Expandable from 4 to 12 or more RF Ports)
Show details for High RF Output Power RequirementsHigh RF Output Power Requirements

System Characteristics
Universal Test Head InterfaceFixture on Test Head

Standard Systems Include:

System Computer with OS/2 Operating System


Uninterruptible Power Source (UPS) for Complete System
System Rack, Test Head Manipulator, System Matrix & Cables
RF/Microwave System Receiver
RFIC/MMIC Test Head
Includes RF 2, 3, 6 & 7 (<100 MHz to >4 GHz) and RF 4 & 5 (<1 MHz to >500 MHz).
Programmable DUT Controller & Standard Plug-in Application Modules
Includes VI1, Vcc 1, 2, 3 & 4, Device Power Lines (DP 1-16),
Digital Control Lines (DB 1-8) with Current Measurement Capability,
Differential Voltage Measurement Lines (VM 1 - 4, 1N - 4N).
Synthesized Microwave Source (System LO)
Synthesized Microwave Source (RF Stimulus Source, RF Source 1)
Base Operating Environment, Software Utilities & Math Package
Graphical Test Plan Builder/Editor
Test Plan Optimizer
IFIC/RFIC Test Executive
RF Measurement & Calibration Software (S Parameters, Noise Figure & Power)
Auto-Interpolation of Calibration Data
RF Pulse Profiling
Source 2 routed to RF8
USB Flash memory support
System Installation
On-site System Training (first system only)

Show details for System FootprintSystem Footprint
Show details for Installation RequirementsInstallation Requirements
Show details for WeightWeight
Hide details for System Warranty (1 year hardware / 90 day software)System Warranty (1 year hardware / 90 day software)

Roos Instruments warrants its hardware products and replacement parts/modules against defects in materials and workmanship for one year. If RI receives notice of such defects during the warranty period, RI will, at its option, repair or replace the hardware products or replacement parts/modules which prove to be defective.

Roos Instruments warrants its software products, when properly installed, will not fail to execute their programming instructions due to materials and workmanship for 90 days. If RI receives notice of such defects during the warranty period, RI will, at its option, repair or replace the defective software media. RI does not warrant that operation of software or hardware will be uninterrupted or error free.

All fixtures and RI Kits are covered by 30-day limited warrantees.


Show details for TrainingTraining

Support Components


Technical Support Packages
Standard Support Package

"RI Standard Support" provides the recommended level of basic support for keeping test systems in compliance with world class quality standards. Other support options can be added to meet customer specific quality requirements.

PSR - RI Phone Support for Hardware Service and Repair (RIK0041A)


Phone and e-mail support for hardware repair and calibration issues.

SU - Software Updates (RIK0050A)
Software updates for new and/or improved measurement buttons, data viewers & worksheets, calibration, verification & diagnostic test plans, user interface functions, and editing tools. Software Updates are released electronically as needed and/or as requested by the user. Software Updates is priced according to the number of systems installed at one site. Site and Global licenses are available.

SILVER Technical Support



Includes STANDARD SUPPORT plus...

ME - Fast Ship Module Exchange (RIK0044A)
Roos Instruments will maintain replacement modules for the test system at Roos Instruments, Santa Clara, California. If a hardware failure occurs, Roos Instruments will ship, by the fastest method available, replacement modules to the test system.
The cost for the replacement module(s) to repair a hardware failure is included in Hardware Repair Replacement Parts (HRP) support option. If the test system does not have Hardware Repair Replacement Parts support, the replacement module(s) must be purchased before the module(s) can be shipped or the user must have an open Purchase Order with RI for Hardware Repair


GOLD Technical Support

Includes STANDARD SUPPORT plus...

ME - Fast Ship Module Exchange (RIK0044A)
Roos Instruments will maintain replacement modules for the test system at Roos Instruments, Santa Clara, California. If a hardware failure occurs, Roos Instruments will ship, by the fastest method available, replacement modules to the test system.
The cost for the replacement module(s) to repair a hardware failure is included in Hardware Repair Replacement Parts (HRP) support option. If the test system does not have Hardware Repair Replacement Parts support, the replacement module(s) must be purchased before the module(s) can be shipped or the user must have an open Purchase Order with RI for Hardware Repair.

PTS - Production Technical Support (RIK0062A)

Phone in and e-mail support for production issues including but not limited to technical support for using the tester and the system software in a production test environment, assistance in directing how to clea