| Part # | Desciption | Price | Category | Availability |
|---|---|---|---|---|
| Y2000Z2B | RIFL Test head HUB Stack | Part | 4-6 weeks | |
| Y200031B | IF Detector for Receiver |  | Part | 4-6 weeks |
| Y200022D | Dual Channel Oscope | Part | Expired | |
| Y200013B | Dual Channel ARB | | Part | Expired |
| Y000CWB1 | High Power Supply Pulser RI8589 Cal and Diag Block | Part | 4-6 weeks | |
| Y000CWA2 | High Power Supply/Pulser Diagnostic Block | | Part | 4-6 weeks |
| Y000BUA1 | Cassini Noise Source Calibration Adapter | Part | 4-6 weeks | |
| Y000A2B1 | Cass16 FixturePower + CBITS | | Part | Contact Factory |
| Y00099C1 | RIFL Testhead Top Board (Front/Rear) | Part | 4-6 weeks | |
| Y00065A3 | Super Fixture Carrier, Active , with s/n chip | | Part | 4-6 weeks |
| Y00065A1 | Super Fixture Carrier, Active | Part | 4-6 weeks | |
| Y0002TB2 | Testhead Power Filter | | Part | Expired |
| Y0002GD1 | Source Attn Control for SRC12 | Part | Expired | |
| Y0002EA1 | Interface Board for Anritsu 68000 Source | | Part | Expired |
| Y00024F1 | Power VI 3 amp | Part | 4-6 weeks | |
| Y00024D1 | Power VI 3 Amp | | Part | Expired |
| Y00023C2 | Parameteric Measure for DB Lines | Part | 4-6 weeks | |
| Y00022B3 | Carrier 12, VI | | Part | 4-6 weeks |
| Y0001YB1 | GPIB Board | Part | Expired | |
| Y0001XD2 | IF Gain & Filter for Receiver | | Part | 4-6 weeks |
| Y0001SD1 | Fet Switch Matrix & Cmp, Data Bit Lines | Part | 4-6 weeks | |
| Y0001RB1 | Vcc Relay Matrix | | Part | 4-6 weeks |
| Y0001QA2 | Relay/Switch Driver | Part | 4-6 weeks | |
| Y0001LD1 | Handler Pod Board | | Part | 4-6 weeks |
| Y0001JC1 | VM Measure | Part | 4-6 weeks | |
| Y0001IB1 | Octal Dac for Y00024A1 Hi Current Drv | | Part | Expired |
| Y0001GB4 | Pin Switch Driver | Part | 4-6 weeks | |
| Y0001DC1 | DDS | | Part | 4-6 weeks |
| Y0000PB1 | Dual Vcc, 16 bit | Part | 4-6 weeks | |
| Y0000HA1 | Decoder with 10 MHz Coax, Exchange Only | | Part | Expired |
| Y0000BA1 | Digital Input | Part | Expired | |
| Y0000AA1 | V Measure (12 Bit ADC) | | Part | Expired |
| Y00006A2 | 16 Bit OC Driver | Part | Expired | |
| Y00006A1 | 32 Bit OC Driver | | Part | Expired |
| W+S | Standard Support Package, 1 Yr (W+S) | CASSINI | ||
| WIMFGMYA | Quad Site, V Band Pedestal Support | | Part | 12+ weeks (Limited) |
| WIMFFPYF | Stiffener Prober PCB | Part | Expired | |
| WIMFFJRB | NXP TFF Pedestal | | Part | 4-6 weeks |
| WIMFCBWB | RI7100A Side Plate (Qty 1) | Part | 4-6 weeks | |
| WIGIG-CASSINI | 60 GHz WiGig Devices | | Application | |
| WARRANTY | Standard Warranty Discount, 1 Yr | CASSINI | ||
| W1MFGTRA | Bracket Mnt Control Board VBand ADI | | Part | 4-6 weeks |
| W1MFGTCA | WR15 90DEG 1.0 RAD UG385 Trimmed | Part | 4-6 weeks | |
| W1MFGNEA | Bracket, Termination Coupler | | Part | 4-6 weeks |
| W1MFGNCA | Bracket,Radiall SP4T/SP6T | Part | 4-6 weeks | |
| W1MFGMZA | Waveguide Blind Mate Float Launch Support Bar | | Part | 12+ weeks (Limited) |
| W1MFGHLA | WR 15, Straight, 2", UG385 Trimmed | Part | 4-6 weeks | |
| W1MFFYYB | RR-12 WG Blind Mate Fixture Extension Block 2 | | Part | 4-6 weeks |
| W1MFFWTA | WR12 2" Straight Trimmed | Part | 4-6 weeks | |
| W1MFFRCC | Probe Card Holder Round | | Part | Expired |
| W1MFFALA | Keyboard spacer for Cass 16 | Part | ||
| W1MFEUWA | SUPPORT MMPX BOTTOM | | Part | |
| W1MFEUVA | SUPPORT MMPX TOP | Part | ||
| W1MFENBC | Support Insert Single, Matrix | | Part | |
| W1MFEJXE | COAX, CONFRM, .085,#12F special-SMAM 8" | Part | 4-6 weeks | |
| W1MFEJWB | COAX, CONFRM,.085,#12F special-#12F special 8" | | Part | 4-6 weeks |
| W1MFCZZA | Clamp, 20 Coax Pockets Seiko | Part | 4-6 weeks | |
| W1MFCJTA | MT1550 "Merlin" Pedestal | | Part | 4-6 weeks |
| W1MFBKGB | Coax SMA M to SSIS F 12" | Part | 4-6 weeks | |
| W1MFBJRB | Coax SMA M to SMA F 10.5" | | Part | 4-6 weeks |
| T-X | Exchange TIMs, 1 Yr | CASSINI | ||
| T-U | Upgrade TIMs, 1 Yr | | CASSINI | Limited Availability: 12+ weeks |
| T-L | Loaner TIMs, 1 Yr | CASSINI | ||
| SU | Software Updates - 1 Year | | RI7100A | Expired |
| SR20 | SandTek Modular Automated Test Equipment (Cassini) | System | With New System Purchase | |
| SOCKET01 | Socket, Johnstech Pad series | | Part | 1-2 weeks |
| S001 | Travel Labor & Costs for On-site System Installation & Training | CASSINI | 4-6 weeks | |
| RITS | Roos Instruments Test Seconds (45 Million) | | System | No Replacemeent Planned |
| RIK0380A | Engage RF Insert, 40 GHz GPPO-SMA(f) Set back floating | $1,260 | Fixture Inserts | 4-6 weeks |
| RIK0378A | Open Fixture, DIB Dock, Engage+Sides, Gen2 | $9,910 | Fixture Top Plates | Contact Factory |
| RIK0377A | Open DIB Dock, Stiffener, Top Hat DIB | $3,950 | Fixture DIB Layer | Contact Factory |
| RIK0376A | Engage RF Insert, 6 Ghz, Quad PKZ#12-Bullseye | $1,450 | Fixture Inserts | Contact Factory |
| RIK0375A | Engage RF Insert, 50 GHz SSMP-2.4mm Cal | $730 | Calibration Tools | 4-6 weeks |
| RIK0374A | Engage RF Insert, 26 GHz SSMP-SMA Calibrate | $700 | Calibration Tools | 4-6 weeks |
| RIK0367A | 50 GHz Calibration Kit Cal Service | $4,660 | Services | 6-8 weeks |
| RIK0360A | Open Fixture, DIB Dock, Engage + Sides, Long Legs | $7,270 | Fixture Top Plates | Contact Factory |
| RIK0359A | Open DIB Dock, Wall w/ Air Fitting, Top Hat DIB | $154 | Fixture DIB Layer | 4-6 weeks |
| RIK0358A | RF Cable, Semi-Rigid SSMP(m) Bulkhead - 2.4mm(m), 12" | $750 | Fixture Cables | 4-6 weeks |
| RIK0357A | RF Cable, Flex SSMP(m) Bulkhead - 2.92mm(m), 12" | $750 | Fixture Cables | 4-6 weeks |
| RIK0356A | Block, FIX Power Spyder, Pod+Open Fixture | $2,030 | Fixture Blocks | 4-6 weeks |
| RIK0355A | Engage WG Insert, 70-86GHz, RR12 Top Hat (DIB Side) | $976 | Fixture DIB Layer | Contact Factory |
| RIK0354A | FixKit, 70-86GHz TIM to 2x Engage WG RR12 | $3,928 | Fixture Inserts | 4-6 weeks |
| RIK0353A | FixKit, Fixture CBits Pod w/ 2x Engage DC 16 Insert | $545 | Fixture Inserts | 4-6 weeks |
| RIK0352A | FixKit, Fixture Pod Pwr to 1x Engage DC 16 pin Insert w/wires | $545 | Fixture Inserts | 4-6 weeks |
| RIK0351A | FixKit, 25GHz TestSet TIM to 5x Engage SSMP Inserts | $6,150 | Fixture Inserts | 4-6 weeks |
| RIK0350A | FixKit, DC Pulser TIM to 3x Engage DC 16 pin Inserts | $1,820 | Fixture Inserts | 4-6 weeks |
| RIK0349A | FixKit, PhaseNoise TIM Block to 2x Dual BE Inserts | $2,230 | Fixture Inserts | 4-6 weeks |
| RIK0348A | FixKit, WF+LNC TIM Blk to 4x Dual BE Inserts | $4,180 | Fixture Inserts | 4-6 weeks |
| RIK0347A | FixKit, 50-70GHz TIM to 2x Engage WG RR15 | $3,928 | Fixture Inserts | 4-6 weeks |
| RIK0346A | FixKit, 2-50GHz TIM to 2x Engage SSMP Inserts | $2,908 | Fixture Inserts | 4-6 weeks |
| RIK0345A | FixKit, Receiver TIM to 2x Engage Dual BE & 2 SMA(f) | $2,925 | Fixture Inserts | 4-6 weeks |
| RIK0344A | FixKit, Digital TIM to 4x Engage Digital, 80 pins | $4,410 | Fixture Inserts | 4-6 weeks |
| RIK0343A | FixKit, 25 GHz Src3 TIM to Engage SSMP | $1,510 | Fixture Inserts | 4-6 weeks |
| RIK0342A | FixKit, DC TIM Harness to 4x Engage DC 16 pin Inserts | $1,900 | Fixture Inserts | 4-6 weeks |
| RIK0341A | Pod Module, DIB MEMS Switch Driver | $910 | Fixture Modules | 4-6 weeks |
| RIK0340A | Block, Device Power, Harness w/out DC Inserts | $846 | Fixture Blocks | 4-6 weeks |
| RIK0339A | RF Cable, Semi-Rigid, SSMP#12(f)-SSMP(f) Bulkhead, 12" | $1,048 | Fixture Cables | 4-6 weeks |
| RIK0338A | RF Cable, Semi-Rigid, SSMP#12(f)-SSMP(f), 12" | $320 | Fixture Cables | 4-6 weeks |
| RIK0337A | Engage RF Insert, PKZ#12-SSMP Fixture Side | $1,230 | Fixture Inserts | 4-6 weeks |
| RIK0336A | RF Cable Semi-rigid SSMP(M) Bulkhead - 2.4mm (M) 8" | $840 | Fixture DIB Layer | 4-6 weeks |
| RIK0335A | Engage RF Insert, SSMP Mate Frame Top Hat (DIB Side) | $210 | Fixture DIB Layer | 4-6 weeks |
| RIK0334A | Open Fixture, Short DIB Dock, Engage + Sides | $5,460 | Fixture Top Plates | Contact Factory |
| RIK0333A | Open Fixture, Frame Assembly, Short | $634 | Fixture Sides | Contact Factory |
| RIK0332A | Open DIB Dock, Wall, Top Hat DIB | $111 | Fixture DIB Layer | Contact Factory |
| RIK0331A | Open DIB Dock, Leg, Top Hat DIB | $85 | Fixture DIB Layer | Contact Factory |
| RIK0330A | Open DIB Dock, Stiffener, Top Hat DIB | $2,490 | Fixture DIB Layer | Contact Factory |
| RIK0329A | Engage WG Insert, 50-70GHz, RR15 Fixure Side | $429 | Fixture Inserts | Contact Factory |
| RIK0328A | Engage WG Insert, 50-70GHz, RR15 Top Hat (DIB Side) | $976 | Fixture DIB Layer | Contact Factory |
| RIK0327A | Engage RF Insert, 18 Ghz, Dual PKZ#12-Bulls Eye | $980 | Fixture Inserts | Contact Factory |
| RIK0326A | Engage Lock, DIB Pedestal Support, Rectangle | $536 | Fixture Pedestal Support & Clamps | 12+ weeks (limited) |
| RIK0325A | Engage Lock, Pulldown Catch DIB Clamp, Qty 1 | $275 | Fixture Pedestal Support & Clamps | 12+ weeks (limited) |
| RIK0324A | Engage Lock, DIB Clamp Rectangle | $811 | Fixture Pedestal Support & Clamps | 12+ weeks (limited) |
| RIK0323A | Engage RF Insert, 50 GHz SSMP Fixture Side | $1,450 | Fixture Inserts | 4-6 weeks |
| RIK0322A | RF Cable, Semi-Rigid SSMP#12(f) - 2.4mm(m), 12" | $750 | Fixture Cables | 1-2 weeks |
| RIK0321A | Block, 2-50 GHz RF | $740 | Fixture Blocks | 4-6 weeks |
| RIK0320A | SSD Replacement for EPC with ELO Touch | $990 | Replacement Parts | 4-6 weeks |
| RIK0319A | Block, 80 GHz Dual RR-12 E Band | $1,660 | Fixture Blocks | 4-6 weeks |
| RIK0318A | RF Cable, Conform, PKZ#12(f)-PKZ#12(f), 12" | $260 | Fixture Cables | 4-6 weeks |
| RIK0317A | Block, 50-70 GHz Dual RR-15 V Band | $1,670 | Fixture Blocks | 4-6 weeks |
| RIK0316A | Engage RF Insert, 20 GHz SSMP Conn & Support (DIB Side) | $260 | Fixture DIB Layer | 4-6 weeks |
| RIK0315A | Open Fixture, Quad Top Plate & Covers | $1,950 | Fixture Top Plates | Contact Factory |
| RIK0314A | Open Fixture, Tall DIB Dock Engage + Sides | | Fixture Top Plates | Replaced By RIK0360A Improved Functionality |
| RIK0313A | 50 GHz Calibration Kit Add-On | $39,530 | Calibration Tools | Contact Factory |
| RIK0312A | V-Band, WR15 Calibration Kit Cal Service | $5,232 | Services | 6-8 weeks |
| RIK0311A | V-Band, WR-15 50-75 GHz, Cal Kit Add-On | $43,656 | Calibration Tools | Contact Factory |
| RIK0310A | E-Band, WR12 Calibration Kit Cal Service | $5,232 | Services | 6-8 weeks |
| RIK0309B | Engage DC Insert, 16 Pin 2x4 Header & Ribbon Cbls | $371 | Fixture Inserts | 4-6 weeks |
| RIK0309A | Engage DC Insert, 16 pin w/ PCB ribbon longer | | Fixture Inserts | Replaced By RIK0309B |
| RIK0308A | Engage DC Insert, 16 pin w/ PCB ribbon | Fixture Inserts | Replaced By RIK0309B Improved 2x5 Ribbon headers | |
| RIK0307A | Block, FIX Power, Pod Carrier, Open Fixture | $1,680 | Fixture Blocks | 4-6 weeks |
| RIK0306B | Engage DC Insert, 16 pin | $380 | Fixture Inserts | 4-6 weeks |
| RIK0305A | Open Fixture, Quick Lock Top Plate | $840 | Fixture Top Plates | Contact Factory |
| RIK0304A | Open Fixture, Prober Engage Assy | $4,240 | Fixture Top Plates | Contact Factory |
| RIK0303A | Open Carrier, Pods Backplane | $1,010 | Fixture Carriers | Contact Factory |
| RIK0302A | Open Fixture, Frame Assembly, Long | $830 | Fixture Sides | Contact Factory |
| RIK0301A | Virtual Workstation Network Appliance | $2,250 | Replacement Parts | 4-6 weeks |
| RIK0300A | SN Chip Wire Length Adjustable 4 Wire (1ea.) | $150 | Fixture Accessories | 4-6 weeks |
| RIK0298A | RF Cable, Flex, PKZ #12(f)-MCX(m), 20" | $210 | Fixture Cables | 4-6 weeks |
| RIK0297A | E-Band WR-12 70-87 GHz, Cal Kit Add-On | $61,630 | Calibration Tools | Contact Factory |
| RIK0296A | Engage Digital Insert, Engage, 20 pin, Coax Ribbon | $950 | Fixture Inserts | 12+ weeks (limited) |
| RIK0293B | Block, 80 GHz Dual RR-12 E Band | Fixture Blocks | Replaced By RIK0319A Improved Functionality (moved isolation ring) - all field models retrofitted | |
| RIK0293A | Block, 80 GHz Dual RR-12 E Band | | Fixture Blocks | Replaced By RIK0293A New RR12 revB design introduced |
| RIK0290B | Pod Module, C-Bits (24) | $720 | Fixture Modules | 4-6 weeks |
| RIK0290A | C-Bits Fixture Pod | | Fixture Modules | Replaced By RIK0290B Improved Pod |
| RIK0289A | Pod Module, 2 Dual 6 GHz SP4T RF Switches | $1,660 | Fixture Modules | 4-6 weeks |
| RIK0287A | Block, FET Pulser Bulk Power TIM | $810 | Fixture Blocks | 4-6 weeks |
| RIK0286A | Block, Diag/Cal, High Power Supply/Pulser TIM | $1,530 | Calibration Tools,Fixture Blocks | 4-6 weeks |
| RIK0285A | Matrix Fixture, Quad Top Plate (Numeric) | $1,100 | Fixture Top Plates | 4-6 weeks |
| RIK0284A | RF Cable, Conform, SMA(m)-SMA(m), 11" | $80 | Fixture Cables | 4-6 weeks |
| RIK0283B | Adapter, WR-12 WG to RR-12 Launch | | Fixture Cables | Expired |
| RIK0283A | Adapter, WR-12 WG to RR-12 Launch | Fixture Cables | Replaced By RIK0283B Improved Functionality | |
| RIK0280A | RF Cable, Flex, SMA(m)- MCX(m), 14" | $140 | Fixture Cables | 1-2 weeks |
| RIK0279A | Matrix Fixture, Quad DIB Clamp | $740 | Fixture Pedestal Support & Clamps | 4-6 weeks |
| RIK0278A | Matrix Fixture, Quad Pedestal Support | $170 | Fixture Pedestal Support & Clamps | 4-6 weeks |
| RIK0277A | Matrix Fixture, Quad Top Plate (Alpha+Numeric) | $1,120 | Fixture Top Plates | Limited Availability: 12+ weeks |
| RIK0276A | Keyboard Tray, Aux Rack | $510 | Replacement Parts | 4-6 weeks |
| RIK0275A | Soft Dock Resource Plate, DSub 25 pin | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0274A | Soft Dock Resource Plate, DSub 15 pin | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0273A | RF Insert, 20 GHz SSMP Calibrate (Side A) | $670 | Calibration Tools | 4-6 weeks |
| RIK0272A | Adapter, SMA(f)-N(f) | $390 | Fixture Cables | 1-2 weeks |
| RIK0271A | Soft Dock Resource Plate, N-Type Connector | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0270A | Soft Dock Resource Plate, Large Corner Filler | $20 | Fixture Resource Plates | 4-6 weeks |
| RIK0269A | Soft Dock Resource Plate, Small Corner Filler | $20 | Fixture Resource Plates | 4-6 weeks |
| RIK0268A | Soft Dock Center Rail | $250 | Fixture Resource Plates | 1-2 weeks |
| RIK0267B | Parallel Handler POD (RI8517B) + 15' RIFL Cable | $3,500 | Fixture Control PODs | 4-6 weeks |
| RIK0267A | Parallel Handler POD + 15' RIFL Cable | | Fixture Control PODs | Replaced By RIK0267B Placeholder. No rev A was made/shipped. |
| RIK0266A | Serial Handler POD (RI8516B) + 15' RIFL Cable | $3,380 | Fixture Control PODs | 4-6 weeks |
| RIK0265A | GPIB Prober POD (RI8579B) + 15' RIFL Cable | $3,590 | Fixture Control PODs | 4-6 weeks |
| RIK0264A | GPIB Instrument POD (RI8502B) + 15' RIFL Cable | $3,590 | Fixture Control PODs | 4-6 weeks |
| RIK0263A | GPIB Handler POD (RI8552B) + 15' RIFL Cable | $3,420 | Fixture Control PODs | 4-6 weeks |
| RIK0262A | QuickLock, 2 piece 2 Site DUT Clamp, Seiko/Epson | $290 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0261A | QuickLock, Center Bar Support 80mm Pitch | $290 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0260B | QuickLock, Dual DUT Support, Seiko/Epson | $810 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0260A | QuickLock, Dual DUT Support, Seiko/Epson, 4 screw | | Fixture Pedestal Support & Clamps | Replaced By RIK0260B Improved Functionality |
| RIK0259A | QuickLock, DUT Clamp, Seiko/Epson, 8 screw | $780 | Fixture Pedestal Support & Clamps | 12+ weeks (limited) |
| RIK0258A | RF Cable, Flex, PKZ #12(f)-SMA(m), 12" | $180 | Fixture Cables | 1-2 weeks |
| RIK0257A | MMPX Connector Extraction Tool | Fixture Accessories | Expired | |
| RIK0256A | Driver Board, Ribbon Cable, 20" (Qty 1) | $30 | Fixture Modules | 1-2 weeks |
| RIK0255A | Driver Board for Fixture Switches & Attenuators | $260 | Fixture Modules | 1-2 weeks |
| RIK0254A | Attenuator Module, Fixture 20 GHz 31dB in 1dB steps | $3,660 | Fixture Modules | 1-2 weeks |
| RIK0253A | Pin Switch Module, Hi IP3 SP4T, 20 GHz, Reflective | $3,050 | Fixture Modules | 1-2 weeks |
| RIK0252A | Matrix Carrier Mount, 20 GHz Pin Switch or Attenuator | $60 | Fixture Modules | 1-2 weeks |
| RIK0251A | Bottom Plate Mount, 20 GHz Pin Switch or Attenuator | $320 | Fixture Modules | 1-2 weeks |
| RIK0250A | Pin Switch Module, Hi IP3 SP4T 20 GHz, Absorptive | $3,250 | Fixture Modules | 1-2 weeks |
| RIK0249A | Block, Diag/Cal, Device Power TIM | $610 | Fixture Blocks | 1-2 weeks |
| RIK0248A | RF Cable, Conform, SSIS(m)-SMA(f), 3.4" | $190 | Fixture Cables | 1-2 weeks |
| RIK0247A | RF Cable, Flex, SSIS(m)-SMA(m), 11" | $250 | Fixture Cables | 1-2 weeks |
| RIK0246A | RF Cable, Conform, PKZ#12(f)-MCX(m), 12" | $160 | Fixture Cables | 1-2 weeks |
| RIK0245A | 40 GHz Calibration Kit Cal Service | $5,600 | Services | 6-8 weeks |
| RIK0244A | Cassini 16 Test Head Double Counter-weight | $1,010 | Fixture Accessories | 1-2 weeks |
| RIK0243A | RF Cable, Conform, PKZ#12(f)-PKZ#12(f), 16" | $250 | Fixture Cables | 1-2 weeks |
| RIK0242A | Cassini 16 Test Head Single Counter-weight | $520 | Fixture Accessories | 1-2 weeks |
| RIK0241A | QuickLock, Pedestal Support, Rasco Quad | $650 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0240A | QuickLock, DUT Clamp, Rasco Quad | $1,210 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0239A | QuickLock, Pedestal Support, Pin Aligned | $740 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0238A | RF Cable, Flex, 90° MCX(m)-90° MCX(m), 12" | $110 | Fixture Cables | 1-2 weeks |
| RIK0237B | RF Cable, Conform, PKZ#12(f)-K(m), 2" | $340 | Fixture Cables | Limited Availability: 12+ weeks |
| RIK0237A | RF Cable, Semi-Rigid, PKZ#12(f)-K(m), 2" | | Fixture Cables | Replaced By RIK0237B Semi-Rigit too hard to bend, switched to conformable |
| RIK0236A | Matrix Carrier Extra, RIFL (B7A), 5 Modules + Cable | $1,150 | Fixture Carriers | Limited Availability: 12+ weeks |
| RIK0235A | Matrix Fixture, Benchtop Rear Resource Mounting Plate | $70 | Fixture Sides | Contact Factory |
| RIK0234A | Matrix Fixture, Benchtop Side Resource Mounting Plate | $30 | Fixture Sides | Contact Factory |
| RIK0233A | Matrix Fixture, Side Plate, Bench-top | $1,000 | Fixture Sides | Contact Factory |
| RIK0232A | Adapter, FR Softdock, SMA(f)-(f) Bulkhead | $40 | Fixture Cables | 4-6 weeks |
| RIK0231A | RF Cable, Conform, 90° SSMP(f)-90° SSMP(f), 5" | $250 | Fixture Cables | 1-2 weeks |
| RIK0230A | RF Cable, Conform, 2.9K(m)-90° MMPX(m), 16" | $270 | Fixture Cables | 1-2 weeks |
| RIK0229A | Soft Dock Resource Plate, D-Sub 50 pin | $60 | Fixture Resource Plates | 4-6 weeks |
| RIK0228A | Soft Dock Resource Plate, Single Blank | $20 | Fixture Resource Plates | 4-6 weeks |
| RIK0227A | Soft Dock Resource Plate, Double Blank | $20 | Fixture Resource Plates | 4-6 weeks |
| RIK0226A | Soft Dock Resource Plate, BNC x2 | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0225A | Soft Dock Resource Plate, SMA x 8 | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0224A | Soft Dock Resource Plate, DVB/High Power | $40 | Fixture Resource Plates | 4-6 weeks |
| RIK0223A | Soft Dock Resource Plate, DC Pogo Board | $250 | Fixture Resource Plates | 4-6 weeks |
| RIK0222A | Soft Dock Resource Plate, Serial Number (x4) | $210 | Fixture Resource Plates | 1-2 weeks |
| RIK0220A | Switch Module, Dual SPDT High TOIP 6GHz | $770 | Fixture Modules | 1-2 weeks |
| RIK0218A | Switch Module, Dual 6 GHz High TOIP SP4T | $1,400 | Fixture Modules | 1-2 weeks |
| RIK0217C | Matrix RF Insert, 20 GHz SSMP (Fixture Side) | $750 | Fixture Inserts | 4-6 weeks |
| RIK0217B | Matrix Fixture Insert, 20 GHz SSMP (Fixture Side) | Fixture Inserts | Replaced By RIK0217C Improved Functionality | |
| RIK0217A | Matrix Fixture Insert, 20 GHz SSMP (Fixture Side) | | Fixture Inserts | Replaced By RIK0217B Added spring for better blind mate connections |
| RIK0216A | Matrix DIB Insert, 20 GHz SSMP DIB Launch (Side A) | $280 | Fixture DIB Layer | 1-2 weeks |
| RIK0215A | QuickLock, Pedestal Support | | Fixture Pedestal Support & Clamps | Replaced By RIK0239A Seiko Epson and Pin Aligned compatible handlers |
| RIK0214B | Matrix Fixture, QuickLock Top Plate | $760 | Fixture Top Plates | 1-2 weeks |
| RIK0214A | QuickLock Top Plate, Matrix Fixture | | Fixture Top Plates | Replaced By RIK0214B Minor changes to top labeling |
| RIK0213C | QuickLock, DUT Clamp, Seiko/Epson | Fixture Pedestal Support & Clamps | Replaced By RIK0259A 8 screw holes, 4 minimum | |
| RIK0213B | QuickLock, DUT Clamp, Seiko/Epson, 8 screw | | Fixture Pedestal Support & Clamps | Replaced By RIK0259A 8 hole |
| RIK0213A | QuickLock, DUT Clamp, Seiko/Epson | Fixture Pedestal Support & Clamps | Replaced By RIK0213C Had to rev for inventory control compliance reasons. Rev C is identical to Rev A. | |
| RIK0212A | Matrix RF Insert, 15 GHz, 3 tab, SMA, QuickLock | $200 | Fixture Inserts | 1-2 weeks |
| RIK0211A | Block, RF SMA Bulkhead for AUX ports | $660 | Fixture Blocks | 1-2 weeks |
| RIK0210A | RF Cable, Conform, PKZ#12(f)-SMA(m), 8" | $100 | Fixture Cables | 1-2 weeks |
| RIK0209A | RF Cable, Conform, .086, 90° SSMP(GPPO)(f)-SMA(m), 9" | $370 | Fixture Cables | 1-2 weeks |
| RIK0208A | RF Cable, Conform, .086, SSMP(f)-SMA(m), 7" | $440 | Fixture Cables | 1-2 weeks |
| RIK0206A | RF Cable, Flex, MCX(m)-90° MCX(m), 13" | $100 | Fixture Cables | 1-2 weeks |
| RIK0205A | TIM Replacement Handle | $410 | Replacement Parts | 4-6 weeks |
| RIK0204A | Thread-locking fluid, Fixture Assembly (1 tube) | $10 | Fixture Accessories | 1-2 weeks |
| RIK0203B | Switch Module, Dual SP4T RF Switch DC - 20GHz | $2,810 | Fixture Modules | 1-2 weeks |
| RIK0203A | Dual SP4T RF Switch DC - 20GHz (Single Module) | Fixture Modules | Replaced By RIK0203B RIK0203B | |
| RIK0202A | Block, FIX 65A Carrier & Device Power TIM | $660 | Fixture Blocks | 1-2 weeks |
| RIK0201B | Block, FIX to RIFL Carrier, 16" | $470 | Fixture Blocks | 12+ weeks (limited) |
| RIK0201A | Block, FIX to RIFL Carrier, 13 Modules | | Fixture Blocks | Replaced By RIK0201B Extended length of Power Cable to 16" |
| RIK0200A | Matrix Carrier, RIFL (6KB), 13 Modules | $1,250 | Fixture Carriers | 4-6 weeks |
| RIK0199B | SN Chip Wire Length Adjustable 4 Wire | | Fixture Accessories | Replaced By RIK0300A Compatible part, QTY 1 |
| RIK0199A | Fixture SN Chip (ESN) with 4-wire Harness (2 ea) | Fixture Cables | Replaced By RIK0300A QTY 1 - current ESN component (100% compatible) | |
| RIK0198B | Block, Waveguide mmWave W12, 8 PKZ | $1,260 | Fixture Blocks | 1-2 weeks |
| RIK0198A | Block, Waveguide mmWave Mount | Fixture Blocks | Replaced By RIK0198B RIK0198B includes Waveguide. | |
| RIK0197A | RF Cable, Conform, PKZ#12(f)-.085 SMA(m), 11" | $290 | Fixture Cables | 1-2 weeks |
| RIK0196A | RF Cable, Conform, PKZ#12(f)-SMA(m), 18" | $320 | Fixture Cables | 1-2 weeks |
| RIK0195A | RF Cable, Flex, SMA(m)- MCX(f), 7" | $100 | Fixture Cables | 1-2 weeks |
| RIK0194A | RF Cable, Flex, 90° MCX(f)-90° MCX(f), 7" | $130 | Fixture Cables | 1-2 weeks |
| RIK0193A | RF Cable, Flex, MCX(f)-MCX(f), 7" | $160 | Fixture Cables | 1-2 weeks |
| RIK0192A | DC Jumper Wires, 28AWG, 12" (qty 10) | $170 | Fixture Cables | 1-2 weeks |
| RIK0191A | DC Jumper Wires, 28AWG, 8" (qty 10) | $170 | Fixture Cables | 1-2 weeks |
| RIK0190A | DC Jumper Wires, 28AWG, 4" (qty 10) | $170 | Fixture Cables | 4-6 weeks |
| RIK0189A | AC Coax Cables, 1x3 Shielded, Twisted Pair, 16" (qty 2) | $330 | Fixture Cables | 1-2 weeks |
| RIK0188A | Fixture Harness 40 cond 18" 2ea. for RI7100A | Fixture Cables | Replaced By RIK0166B Cassini replaced RI7100A | |
| RIK0187B | Block, Carrier Passive Carrier 18" | $1,190 | Fixture Blocks | 12+ weeks (limited) |
| RIK0187A | Fixture Power & Control Cassini 12" | Fixture Blocks | Replaced By RIK0187B wires lemgthened | |
| RIK0186A | RI7100A, Fixture VI Harness, 16" | | Fixture Blocks | Replaced By RIK0166B RI7100A Limited Availability, use Cassini FIX Block instead. |
| RIK0185A | Adapter, MCX(m)-SMA(f) | $60 | Fixture Cables | 1-2 weeks |
| RIK0184A | RF Cable, Flex, MCX(m)-DIN(f), 15" | $260 | Fixture Cables | 1-2 weeks |
| RIK0183A | RF Cable, Flex, SSIS(m)-90° MCX(m), 15" | $190 | Fixture Cables | 1-2 weeks |
| RIK0182B | Fixture Side Covers ( Panels / Plates ) for 12 RF size Top plate | | Fixture Sides | Replaced By RIK0302A Improved Functionality |
| RIK0182A | Fixture Side Covers ( Panels / Plates ) for 12 RF size Top plate | Fixture Sides | No Replacemeent Planned | |
| RIK0181A | RF Cable, Conform, PKZ#12(f)-90° MMPX(m), 16" | $260 | Fixture Cables | 1-2 weeks |
| RIK0180A | RF Cable, Flex, PKZ#12(f)-MCX(m), 18" | Fixture Cables | Replaced By RIK0298A 18" cables shown to have repeatability issues, 20" cables made from different vendor without any iss | |
| RIK0179A | RF Cable, Conform, .086, Spec. #12(f)-SMA(m), 8" | $490 | Fixture Cables | 1-2 weeks |
| RIK0178C | Fixture Bottom Plate, Cassini 16 slot, Basic Assembly | $1,140 | Fixture Bottom Plates | 1-2 weeks |
| RIK0178B | Fixture Bottom Plate, Cassini 16 slot, Basic Assembly | | Fixture Bottom Plates | Replaced By RIK0178C Made thicker to |
| RIK0178A | Fixture Bottom Plate, Cassini 16 slot, Basic Assembly | Fixture Bottom Plates | Replaced By RIK0178B Improved ridgitity provides better platform for holding preceise calibration equipment for mmWave eq | |
| RIK0177A | Fixture Bottom Plate, Cassini 8 slot, Basic Assembly | | Fixture Bottom Plates | Replaced By RIK0178A Cassini 8 Limited Availablility, not compatible with Spyder |
| RIK0176A | Fixture Bottom Plate, RI7100, Basic Assembly | Fixture Bottom Plates | Replaced By RIK0177A RI7100A in limited availability. | |
| RIK0175B | Matrix Carrier, RIFL (B7A), 5 Modules + FIX 16" Block | $1,600 | Fixture Carriers | 1-2 weeks |
| RIK0175A | Carrier, RIFL (B7A), 5 Modules + FIX Block | Fixture Carriers | Replaced By RIK0175B Longer Carrier harness, extended from 12" to 18" | |
| RIK0174A | Fixture SN Chip with Harness (2ea.) | | Fixture Accessories | Replaced By RIK0300A 300A replaces RIK0199B with longer cables and qty 1 |
| RIK0173A | Foot Stop AUX rack | $170 | Replacement Parts | 1-2 weeks |
| RIK0172A | RF Cable, Semi-Rigid, PKZ#12(f)-K(m), 12" | $320 | Fixture Cables | 1-2 weeks |
| RIK0171A | RF Cable, Conform, 2.9K(m)-90° MMPX(m), 14" | $300 | Fixture Cables | 1-2 weeks |
| RIK0170A | RF Cable (Coax,Confrm,#12F special-SMAM,8") QTY 1 | | Fixture Cables | Expired |
| RIK0169B | RF Cable, Conform, PKZ#12(f)-PKZ#12(f), 8" | $290 | Fixture Cables | 1-2 weeks |
| RIK0169A | RF Cable, Conform, PKZ#12(f)-PKZ#12(f), 8" | | Fixture Cables | Replaced By RIK0169B Rev B cable is now insulated (rev A was not) |
| RIK0168A | Block, RF Block, 16 PKZ | $330 | Fixture Blocks | 1-2 weeks |
| RIK0167B | Block, 40 GHz RF TIM, Cal/Diag | $1,080 | Fixture Blocks | 1-2 weeks |
| RIK0167A | Block, 40GHz RF TIM, Cal/Diag | Fixture Blocks | Replaced By RIK0167B Added hardware to provide strain relief and reduce load on 9mm connectors | |
| RIK0166B | Block, FIX Pwr, Cbits and S/N pins (2 rows, No RIFL) | $460 | Fixture Blocks | 1-2 weeks |
| RIK0166A | Block, FIX Pwr, Cbits and Serial Number (2 rows) | Fixture Blocks | Replaced By RIK0166B Use rev B (3 rows) | |
| RIK0165A | Fixture Docking Ears - Intest Interface (1 pair) | $1,930 | Fixture Docking | 6-8 weeks |
| RIK0164A | Matrix Fixture, Side Plates, Large Quad | $920 | Fixture Sides | 2 - 4 weeks |
| RIK0163A | Matrix Fixture, Basic Top Plate | $1,040 | Fixture Top Plates | 4-6 weeks |
| RIK0162A | USE 178A++ - Cassini 16-Slot Diagnostic/Interface Plate | Fixture Accessories | Replaced By RIK0178A | |
| RIK0161A | Block, RF Assembly 16RF with 4 Cables - Cassini | | Fixture Blocks | Replaced By RIK0168A Replacement works for both types (locked and unlocked-special) of PKZ cable |
| RIK0160A | Carrier, Active (6KA), 13 Modules, Matrix | Fixture Carriers | Replaced By RIK0200A Improved Functionality | |
| RIK0159A | Matrix Fixture, Sides 8 Slot / 7100 | | Fixture Sides | Replaced By RIK0333A Ri7100 Limited Support, Cassini is available |
| RIK0158A | RF Cable Kit (#12F - #12F 8" Conformable, 6 Pieces) | Fixture Cables | Replaced By RIK0169B Insulated, split into QTY 1 | |
| RIK0157A | DC Jumper Wires, 28AWG 18" (40 pieces) | $510 | Fixture Cables | 1-2 weeks |
| RIK0156A | DIB RF Launch, 40 GHz, MMPX SMT w/ Saddle Clamp | $230 | Fixture DIB Layer,Fixture Inserts | 4-6 weeks |
| RIK0155B | RF Cable Kit (16" #12F-MMPX, Flex, 90° 2 Cables) | | Fixture Cables | Replaced By RIK0181A Reduced to QTY 1, Same exact cable |
| RIK0155A | RF Cable Kit (14" #12F-MMPX, Flex, Rt Angle 2 Cables) | Fixture Cables | Replaced By RIK0181A Unpacked to QTY 1 | |
| RIK0154A | RF Cable, Conform, PKZ#12(f)-90° MMPX(m) ,16" (qty 5) | | Fixture Cables | Replaced By RIK0181A Unpacked to QTY 1 |
| RIK0153B | Matrix Fixture, Side Plates, Cassini 16 Slot | $1,030 | Fixture Sides | 1-2 weeks |
| RIK0153A | Matrix Top Plate Assembly Cassini 16 (w/ sides & carrier) - EXPIRED | | Fixture Top Plates | Replaced By RIK0153B RIK0134B RIK0160A Split into multiple kits, Use RIK0160A (Carrier), RIK0134B (Top Plates) and RIK0153B (Cassini 16 sid |
| RIK0152B | Matrix Fixture, Quad Top Plate, Pedestal Support & Clamp | $1,650 | Fixture Top Plates,Fixture Pedestal Support & Clamps | Limited Availability: 12+ weeks |
| RIK0152A | Fixture Top Plate, Matrix Quad, Intest Compatible | | Fixture Top Plates | Expired |
| RIK0151B | Cassini 16-Slot Diag/Cal Interface Kit | Calibration Tools | Replaced By Custom contact Each TIM Configuration requires a custom Diag Kit, ask support for the Company Name and configuratio | |
| RIK0151A | Cassini 16-Slot Interface Kit | | Calibration Tools | Replaced By RIK0151B Improved Functionality |
| RIK0150A | 20/40 GHz Calibration Standards Kit | $48,730 | Calibration Tools | Contact Factory |
| RIK0149A | 18 GHz Calibration Standards Kit | $38,890 | Calibration Tools | Contact Factory |
| RIK0148A | Digital Coax Cables, 1x2 , (qty 5) | $230 | Fixture Cables | 1-2 weeks |
| RIK0147A | Module, Digital 40 Pogo Pins | | Fixture Modules | Replaced By RI8535B Better Performance, TIM scales better, SCAN support |
| RIK0146B | Block, Digital TIM, 40 Pins with Cables | $1,300 | Fixture Blocks | 1-2 weeks |
| RIK0146A | Block, Digital TIM, 40 Pins with Cables | | Fixture Blocks | Replaced By RIK0146B No old style cables in inventory. Use replacement. Will need to retrofit existing launches with Shor |
| RIK0145A | Matrix Fixture, Cassini 8 TIM Bottom Plate Assembly | Fixture Bottom Plates | Expired | |
| RIK0144A | Block, Device Power TIM, DC Pins (2x5 x7) | $960 | Fixture Blocks | 1-2 weeks |
| RIK0143B | Use RI0K168A - RF Block Assem 16RF, Fixed Cabling - Cassini | Fixture Blocks | Replaced By RIK0168A Design Changes | |
| RIK0143A | Use RIK0168A - RF Block Assembly 16RF (Fixed) | | Fixture Blocks | Replaced By RIK0168A Part design does not work for PKZ special (temporary) connectors |
| RIK0142A | Block, Digital TIM, 120 Pins with Cables | Fixture Blocks | Replaced By RIK0141A Make available when 120 Pin TIM is shipped | |
| RIK0141A | Block, Digital TIM, 80 Pins with Cables | $2,520 | Fixture Blocks | 1-2 weeks |
| RIK0138A | Matrix RF Insert, 6 GHz, Dual MCX | $990 | Fixture Inserts | 1-2 weeks |
| RIK0137B | Matrix Digital Insert, 20 pin, Coax Ribbon | $730 | Fixture Inserts | 1-2 weeks |
| RIK0137A | Matrix Digital Insert, 20 pin, Coax Ribbon | $730 | Fixture Inserts | 1-2 weeks |
| RIK0136A | Matrix Fixture Insert, Rail Dual DC Pogo, 2x16pin | | Fixture Inserts | Replaced By RIK0135A Improved Functionality |
| RIK0135C | Matrix DC Insert, 16 pin, Shroud, 0.02 in Taller | $380 | Fixture Inserts | 1-2 weeks |
| RIK0135B | Matrix DC Insert, 16 pin, with Shroud | | Fixture Inserts | Replaced By RIK0135C Raised pins 0.002 inches to make better contact with Prober (still works with DIBs too) |
| RIK0135A | Matrix DC Insert, 16 pin | Fixture Inserts | Replaced By RIK0135B Added Shroud to prevent shorts | |
| RIK0134B | Fixture Top Plate, Matrix Quad Site | | Fixture Top Plates | Replaced By RIK0214A Use standard Matrix Top Plates |
| RIK0134A | Matrix Fixture, Top Plate Assembly Quad Site (w/Sides) | Fixture Top Plates | Replaced By RIK0214A RIK0153B Broken up into separate kits to allow more flexibility and simplify configuration process. | |
| RIK0133A | Matrix Fixture, 16 TIM Bottom Plate Assy. Kit | | Fixture Bottom Plates | Replaced By RIK0178A RIK0187B RIK0143B RIK0158A Split into multiple kits, RIK0178A, RIK0187B, 4x RIK0143B, 8x RIK0158A |
| RIK0132A | Coax Driver Buffer Module | Fixture Modules | No Replacemeent Planned | |
| RIK0131A | Cassini RF (BVD) - Dual SMA, 48" | $980 | Replacement Parts | 1-2 weeks |
| RIK0130A | Cassini 8-Slot Interface Kit | Calibration Tools | Replaced By RIK0151B No systems with 8 Testhead slots are in service | |
| RIK0129A | Fixture DUT Clamp Kit, 20RF Fixture Seiko Epson | $790 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0128A | DC Jumper Wires, 28AWG, 12"+18" (qty 30&30) | $730 | Fixture Cables | 1-2 weeks |
| RIK0127A | High Speed Digital Scan Module Kit | | Fixture Modules | Replaced By RI8535A TIM provides better performance |
| RIK0126B | RI7100A Virtual Workstation & OS License | $1,940 | Replacement Parts | 12+ weeks (limited) |
| RIK0126A | Cassini Virtual Workstation & OS License | $1,585 | Replacement Parts | 1-2 weeks |
| RIK0125A | Cassini Installation & Calibration | Services | Expired | |
| RIK0124G | Power Cord, 3-Pin IP44 | $110 | Replacement Parts | 12+ weeks (limited) |
| RIK0124F | Power Cord, C19 - Free, Stripped End (No Plug) | $70 | Replacement Parts | 12+ weeks (limited) |
| RIK0124E | Power Cord, NEMA SI32, ISRAEL | | Replacement Parts | Replaced By RIK0124E Improved Functionality |
| RIK0124D | Power Cord, NEMA CEE7-7, EUROPE | Replacement Parts | Replaced By RIK0124F Custom Plug must be installed by customer | |
| RIK0124C | Power Cord, NEMA BS546, CHINA | | Replacement Parts | Replaced By RIK0124F Custom Plug must be installed by customer |
| RIK0124B | Power Cord, NEMA L6-20 | $100 | Replacement Parts | 12+ weeks (limited) |
| RIK0124A | Power Cord, NEMA 5-20, USA, Taiwan | $60 | Replacement Parts | 1-2 weeks |
| RIK0123A | Matrix Fixture, Single DUT Clamp & Support Kit | Fixture Pedestal Support & Clamps | Replaced By RIK0259A RIK0239A QuickLock improves DIB exchange time and reliability. 8-screw variant is useful for designs with SM | |
| RIK0122A | Use 145A - Matrix Fixture, Small Cassini Bottom Plate | | Fixture Bottom Plates | Expired |
| RIK0121A | Matrix Fixture, RI7100 Bottom Plate Assembly | Fixture Bottom Plates | No Replacemeent Planned | |
| RIK0120B | Matrix Fixture, Top Plate | | Fixture Top Plates | Replaced By RIK0214A QuickLock version fully backward compatible. |
| RIK0120A | Matrix Fixture, Top Plate Assy w/ Carrier & Sides | Fixture Top Plates | Replaced By RIK0160A RIK0120B RIK159A RIK0153B Broken up into separate kits to allow more flexibility and simplify configuration process. | |
| RIK0119A | Matrix Fixture, Dual DUT Clamp & Support Kit | $1,830 | Fixture Pedestal Support & Clamps | 1-2 weeks |
| RIK0118A | Matrix RF Insert, 12 GHz, Center, 1 Tab, Dual SMA | $440 | Fixture Inserts | 1-2 weeks |
| RIK0117A | Matrix RF Insert, 10 GHz, Single SMA | $260 | Fixture Inserts | Limited Availability: 12+ weeks |
| RIK0116A | Matrix Fixture Insert, DC, Rail dual, 2x12 pin | Fixture Inserts | Replaced By RIK0135A RIK0261A Center Rail (RIK0261A) now supports standard offsetting inserts. RIK 135 | |
| RIK0115A | Matrix Fixture Insert, single pogo insert, 12 pin | | Fixture Inserts | Replaced By RIK0135A Use 16Pin instead, RIK135 |
| RIK0114A | Fixture Top Plate, Dual Insert with Dut Clamps | Fixture Top Plates | No Replacemeent Planned | |
| RIK0113A | WF Cable, Flex, DIN(f)-90° MCX (m), 15" (qty 5) | $1,280 | Fixture Cables | 1-2 Weeks |
| RIK0112A | Bar Code Scanner, USB | $260 | Replacement Parts | 1-2 weeks |
| RIK0111A | Load (DUT) Board Evaulation and Repair | | Fixture Repair | No Replacemeent Planned |
| RIK0110A | Fixture Evaluation and Repair Service | $13,300 | Services | Contact Factory |
| RIK0109A | RI7100A Gold Support (SU, ME, FRP, TRS, ETS) | | System Support Options | Replaced By ME FRP TRS No Longer offering Software Updates or Engineering Support for RI7100A |
| RIK0108A | RI7100A Silver Support Package (SU, ME, FRP, TRS) | System Support Options | Replaced By ME FRP TRS No Longer offering Software Updates to RI7100A | |
| RIK0107A | RI7100A Basic Support Package (SU, ME, FRP) | | System Support Options | Replaced By ME FRP No Longer offering Software Updates to RI7100A |
| RIK0106A | Factory Module Calibration (FMC) - Quick Cal | $1,390 | System Support Options | Per Module |
| RIK0105A | High Pass Filter (1 Module) | | Fixture Modules | No Replacemeent Planned |
| RIK0104A | Fixture, Cassini 8 Port Engineering | Fixtures | No Replacemeent Planned | |
| RIK0103C | Use RIK0168A - Cassini RF Block Assembly 16RF | | Fixture Blocks | Replaced By RIK0168A Block Design Change |
| RIK0103B | Use RIK0168A - Cassini RF Block Assembly 16RF | Fixture Blocks | Replaced By RIK0168A Block Design Change | |
| RIK0103A | Use RIK0168A - Cassini RF Block Assembly 8RF | | Fixture Blocks | Expired |
| RIK0102A | RF Cable, Semi-Rigid, PKZ#12(f)-PKZ#12(f), 4" (qty 2) | Fixture Cables | Replaced By Cassini1 Cassin 8 limited availaility. | |
| RIK0101B | RF Cable Kit (18" #12F-MCXM, 6 cables) | | Fixture Cables | Replaced By RIK0196A RIK0196A |
| RIK0101A | RF Cable Kit (18" #12F-MCXM, 6 cables) | Fixture Cables | Replaced By RIK0101A Supplier change, different look and part number | |
| RIK0100B | RF Cable, Flex, PKZ#12(f)-MCX(m), 12" (qty 6) | | Fixture Cables | Replaced By RIK0172A QTY 1 |
| RIK0100A | RF Cable Kit (12" #12F-MCXM, 6 cables) | Fixture Cables | Replaced By RIK0246A Unbundled, use QTY 6 of RIK0246A | |
| RIK0099A | DC Block Pin Repair Kit | $900 | Fixture Repair | 1-2 weeks |
| RIK0098A | 8 TIM Cassini Calibration Kit | Calibration Tools | Replaced By RIK0149A RIK0130A Separated into a Diag Interface Plate (Cal Fixture) and Cal Kit Instruments | |
| RIK0097A | Cassini Infrastructure Spare Parts (LG & SM) | | Replacement Parts | No Replacemeent Planned |
| RIK0096A | Fixture, Cassini 8-Port, 20/30RF | Fixtures | Replaced By RIK0101A RIK0102A RIK0143B RIK0159A RIK0177A RIK0200A RIK202A Split into separate RIKs for easy customization. 10/30RF Top Plate never made into a RIK. | |
| RIK0095B | AC Switch Matrix 8x24 | | Fixture Modules | Replaced By RIK0294A Improved Functionality |
| RIK0095A | AC Switch Matrix 8x24 | Fixture Modules | Expired | |
| RIK0094A | Fixture Large 30 Coax DUT Clamps, Dual Site | | Fixture Pedestal Support & Clamps | Replaced By RIK0163A Improved Functionality |
| RIK0093A | Fixture Small 12 Coax DUT Clamps, Single Site | Fixture Pedestal Support & Clamps | Replaced By RIK0260B Improved Functionality | |
| RIK0092A | Step Attenuator Module, 0-36db, 4 Step | $2,210 | Fixture Modules | 1-2 weeks |
| RIK0091C | Fixture, Pedestal Support 30RF with Pogo Tool | Fixture Pedestal Support & Clamps | No Replacemeent Planned | |
| RIK0091B | Fixture, Pedestal Support 30RF | | Fixture Pedestal Support & Clamps | Expired |
| RIK0091B | Fixture, Pedestal Support 30RF | Fixture Pedestal Support & Clamps | Replaced By RIK0241A RI7100A Limited Support | |
| RIK0091A | Fixture, Pedestal Support 30RF | | Fixture Pedestal Support & Clamps | Expired |
| RIK0090A | Fixture, Pedestal Support 20RF (Seico Epson) | $2,250 | Fixture Pedestal Support & Clamps | 4-6 weeks |
| RIK0089A | Switch, 1x8 Terminated (1 Module) | | Fixture Modules | Expired |
| RIK0088A | Fixture MUX, 1x32, 2x16 (1 Module) | Fixture Modules | Replaced By RIK0294A Improved Functionality | |
| RIK0087A | Diff. I/O Buffer Module, Advanced High BW | $2,380 | Fixture Modules | 12+ weeks (limited) |
| RIK0086A | Delta M1688 Allignment Pins | Fixture Docking | No Replacemeent Planned | |
| RIK0085A | 20 RF Test Fixture Top Plate (Replacement) | | Replacement Parts | No Replacemeent Planned |
| RIK0084A | Carrier, Active (65A), 20 RF Top Plate | Fixture Carriers | Replaced By RIK0200A RIFL Carrier control modules at full speed and can support up to 13 Modules. | |
| RIK0083A | Pogo Alignment Tool, 20RF | | Fixture Repair | Expired |
| RIK0082A | 18 GHz Calibration Kit Cal Service | $4,530 | Services | Contact Factory |
| RIK0081A | Fixture, Bench-Top 20RF, Active Carrier | | Fixtures | Expired |
| RIK0080B | RF Cable Kit (15" SSISM to MCX 90°, 6 Cables) | Fixture Cables | Expired | |
| RIK0080A | RF Cable Kit (15" SSISM to MCX, 6 Cables) | | Fixture Cables | Replaced By RIK0183A Unbundled, Use 6x RIK0183A |
| RIK0079A | Dual Boot Laptop | Replacement Parts | Expired | |
| RIK0078A | Dual Monitor System Controller | | Replacement Parts | Expired |
| RIK0077B | Dual Fixture Diff Amp, HS, w/o Comm Mode Cont. | Fixture Modules | Expired | |
| RIK0077A | High BW Diff. I/O Buffer Module | | Fixture Modules | Replaced By RIK0087A Improved Features |
| RIK0076A | Fixture Fixed Price Repair | Fixture Repair | Expired | |
| RIK0076A | Fixture Fixed Price Repair | | Fixtures | Expired |
| RIK0075A | Fixture, Bench-Top Single Site | Fixture Top Plates | Expired | |
| RIK0074C | Fixture, 20RF | | Fixtures | Expired |
| RIK0074B | Fixture, 20RF | Fixtures | Replaced By RIK0074C | |
| RIK0074A | Fixture, 20 RF (use 74B) | | Fixtures | Replaced By RIK0074B Revised part |
| RIK0073A | RF Cable, Conform, 90° MCX(f)-90° MCX(f), 3" (qty 3) | $310 | Fixture Cables | 1-2 weeks |
| RIK0072B | RF Cable, Flex, 90° MCX(f)-SMA(m), 5" (qty 6) | $400 | Fixture Cables | 1-2 Weeks |
| RIK0072A | RF Cable, Flex, 90° MCX(f)-SMA(m), 5" (qty 6) | Fixture Cables | Replaced By RIK0072A New Vendor, equivalent cables | |
| RIK0071A | RI7100A Fixture POGO Kit | $170 | Fixture Repair | 1-2 weeks |
| RIK0070A | Handler Docking Plate | $9,780 | Fixture Docking | 6-8 weeks |
| RIK0069A | RI Small Handler Dock (Single Site) | | Fixture Docking | Replaced By RIK0070A Standard Docking Interface |
| RIK0068A | Fixture Docking Ears - Standard (1 pair) | $1,770 | Fixture Docking | 6-8 weeks |
| RIK0067A | Dut Boards, unpopulated (fab) | | Fixture Accessories | Expired |
| RIK0066A | Dut Boards, custom loading | Fixture Accessories | No Replacemeent Planned | |
| RIK0065A | Standard Single Site DUT Board Design | | Fixture Accessories | Expired |
| RIK0064A | International Support Upgrade, 1 Year | System Support Options | Replaced By Support | |
| RIK0063B | Engineering Technical Support, 50 hrs (ETS) | | System Support Options | Expired |
| RIK0063A | Engineering Tech. Support Upgrade, 50 Hrs (ETS) | Services | Replaced By E Optional <a href="https://roos.com/supportPlans.html">Cassini Support Package</a> | |
| RIK0062A | Production Technical Support, 1 Year (PTS) | | System Support Options | Replaced By W Included with standard <a href="https://roos.com/supportPlans.html">Cassini Support Package</a> |
| RIK0061A | Fixture, RI7100A Universal Softdock | Fixtures | No Replacemeent Planned | |
| RIK0060A | Maintenance Technical Support, 1 Year (MTS) | | System Support Options | Replaced By Extended Included with standard <a href="https://roos.com/supportPlans.html">Cassini Support Package</a> |
| RIK0059A | Module, Step Attenuator + LNA, 2.5 GHz | Fixture Modules | Replaced By RIK0254A RIK0255A RI7100A Limites Support, Improved Functionality, requires RIFL carrier | |
| RIK0058B | Switch 6 GHz Dual SPDT (1 Module) | | Fixture Modules | Replaced By RIK0220A Higher TOIP, RIFL Controlled (Faster) |
| RIK0058A | Switch 6 GHz Dual SPDT (2 Modules) | Fixture Modules | Replaced By RIK0058B RIK QTY 1 part | |
| RIK0057A | Pogo Pin Spares for RI7100A Test Head | $860 | Replacement Parts | 1-2 weeks |
| RIK0056B | Switch 6 GHz Dual SP4T (1 Module) | Fixture Modules | Replaced By RIK0218A Improved Performance | |
| RIK0056A | Switch 6 GHz Dual SP4T (1 Module) | | Fixture Accessories | Expired |
| RIK0055A | SPDT High Pass Filter (1 Module) | Fixture Modules | Expired | |
| RIK0054B | Divider 3 GHz/ SPDT Switch (1 Module) | | Fixture Modules | Expired |
| RIK0054A | Divider 3 GHz/ SPDT switch module(1 Module) | Fixture Accessories | Expired | |
| RIK0053B | Fixture Cbits Controller (1 Module) | | Fixture Modules | Replaced By RIK0290B Improved Functionality |
| RIK0053A | Fixture Cbits Controller (2 Modules) | Fixture Modules | Replaced By RIK0053B Feature Improvements | |
| RIK0052A | RF Cable Kit (3.4" SSIS(M) to SMA(F) 6 cables) | | Fixture Cables | Replaced By RIK0248A Moved to RIK0248A |
| RIK0051A | RF Cable, Conform, SMA(m)-SMA(m), 11" (qty 5) | Fixture Cables | Replaced By RIK0284A Reduced kit to QTY 1 for easier implementations | |
| RIK0050A | Software Subscription, 1 Year (SU) | | System Support Options | Expired |
| RIK0049A | Delay Line Discriminator Module | Fixture Modules | Replaced By RI8575A Replaced by Cassini TIM | |
| RIK0048A | System Evaluation, 1 Visit | $12,100 | Services | Contact Factory |
| RIK0047A | On Site Repair Maintenance, 1 Year (OSM) | $12,110 | Services | Per System |
| RIK0046A | RI7100A Hardware Repair Labor, 1 Event | | Services | Replaced By RIK0047A Support Contract Required. |
| RIK0045A | RI7100A Factory Replacement Parts, 1 yr (FRP) | Services | Expired | |
| RIK0044A | Fast Ship Module Exchange, 1 year (ME) | | System Support Options | No Replacemeent Planned |
| RIK0043B | Preventive Maintenance & Cal, 1 visit (PMC) | $9,770 | System Support Options | Limited Availability: 12+ weeks |
| RIK0043A | Cassini Calibration & Preventive Maintenance (USA) | $6,000 | Services | Per system |
| RIK0042C | MTS moved to RIK0060A | System Support Options | Replaced By RIK0060A Product Number change to be consistant with backward compatibility rules | |
| RIK0042B | PTS moved to RIK0062A | | System Support Options | Replaced By RIK0062A New Support Packages Available |
| RIK0042A | RI7100A Standard Support Package, 1 yr (PTS,ME,SU) | System Support Options | Replaced By PTS ME No Longer offering Software Updates to RI7100A | |
| RIK0041B | RI7100A Technical and Repair Support, 1 yr (TRS) | | System Support Options | Expired |
| RIK0041A | Repair Support via Phone/Email/Web, 1 yr (PSR) | System Support Options | Replaced By W Included with standard <a href="https://roos.com/supportPlans.html">Cassini Support Package</a> | |
| RIK0040E | Online Cassini Technician Onboarding | $1,380 | Training Courses | Service (N/A) |
| RIK0040C | Guru Admin Training (Online) | $900 | Training Courses | Service (N/A) |
| RIK0040B | Online Cassini Basic Training | $1,380 | Training Courses | Service (N/A) |
| RIK0040A | Test System Training Class (6 students) | Training Courses | Replaced By RIK0040B Online learning has replaced in-person learning | |
| RIK0039B | High Voltage Buffer Module (1 Module) | | Fixture Modules | Replaced By RI8595A Fet Pulser provides calibrated high voltage supply and measure |
| RIK0039A | High Voltage Buffer Module (1 Module) | Fixture Modules | Replaced By RI8589A FET Pulser TIM extends and replaces functionality | |
| RIK0038A | Cassini Diagnostic Training Class per Person | | Training Courses | Replaced By No RIK Contact [email protected] to request training |
| RIK0037A | Advanced Training per Person | Training Courses | Replaced By No RIK Contact [email protected] to request training | |
| RIK0036A | RI Signal Generator, 20 GHz | | Replacement Parts | Replaced By RI7725C Limited Availablity. Best Effort Factory Repair only. |
| RIK0035A | Fixture Top Plate, 12 RFs (DELTA) | Fixture Accessories | Expired | |
| RIK0034A | RF Application Kit (LNA, Mixer, IQ Mod & Demod) | | Applications | No Replacemeent Planned |
| RIK0033B | RF Cable Kit (11" SSISM-SMAM, 5 Cables) | Fixture Cables | Replaced By RIK0247A Unbundled to be sold individually | |
| RIK0033A | RF Cable Kit (11" SSIS(M) to SMA, 5 Cables) | | Fixture Cables | Replaced By RIK0247A Repackaged as QTY 1 |
| RIK0032A | RI7100A Diagnostic kit | Calibration Tools | No Replacemeent Planned | |
| RIK0031A | Calibration Boards, Multi-site Fixture | | Calibration Tools | Expired |
| RIK0030A | Carrier board Pogo alignment tool - RI7100A | Fixture Accessories | Expired | |
| RIK0029B | Fixture, Dual Site 12 RF | | Fixtures | Expired |
| RIK0029A | Fixture, Dual Site 12 RF | Fixtures | Replaced By RIK0029B Revised Kit | |
| RIK0028A | Calibration DUT Boards, 12 Port RI7100A Fixture | | Calibration Tools | Expired |
| RIK0027A | RF Cable Kit (SSIS to SMA, 7", 5 Cables) | Fixture Cables | Replaced By RIK0247A Extended length to 11" | |
| RIK0026B | 6 GHz RF Switch Modules Dual SPDT (2 ea) | | Fixture Modules | Replaced By RIK0058B Improved Functionality |
| RIK0025A | Daymarc 717 Docking Hardware | Docking Hardware | No Replacemeent Planned | |
| RIK0024A | RI7100A CAM Assembly (1 Assembly) | | Replacement Parts | No Replacemeent Planned |
| RIK0023A | RI7100A Calibration Kit | Calibration Tools | Replaced By RIK0149A RI7100A is Limited Availability | |
| RIK0022A | RI7100A Cal Kit **Obsolete** | | Calibration Tools | Replaced By RIK0023A Never Sold |
| RIK0021A | Fixture Ramps (Gen I cam assembly), 1 pair | Fixture Accessories | Replaced By RIK0020A Old generation docking, no longer supported. | |
| RIK0020A | Fixture Ramps (Contoured), 1 pair | $850 | Fixture Accessories | 1-2 Weeks |
| RIK0019B | RI7100A System Controller + OS Lic. | $9,400 | Replacement Parts | Contact Factory |
| RIK0019A | RI7100A System Controller w/ Monitor, OS and Lic. | $12,280 | Replacement Parts | Contact Factory |
| RIK0018B | Fixture, RI7100A Engineering | $2,590 | Fixture Bottom Plates | 1-2 weeks |
| RIK0018A | Test Fixture Engineering Plate - RI7100 | | Fixture Accessories | Replaced By No Repla RI7100 Not Supported |
| RIK0017A | High Speed Serial Digital Module Kit (1 Module) | Fixture Modules | Replaced By RI8535A Replaced by Cassini TIM (no longer available for RI7100A) | |
| RIK0016A | RI7100A On-site Service Parts Kit | | Replacement Parts | No Replacemeent Planned |
| RIK0015A | Differential I/O Module Kit (1 Module) | Fixture Modules | Expired | |
| RIK0014B | Carrier, Active (4VB), RI7100A, 12 RF Top | | Fixture Carriers | No Replacemeent Planned |
| RIK0014A | Active Carrier Assembly Kit (1 Carrier) | Fixture Accessories | Replaced By RIK0084A Carrier Upgraded Not Used since 2003 | |
| RIK0013B | Carrier, Passive w/o harness, RI7100A, 12 RF Top | | Fixture Carriers | Expired |
| RIK0013A | Passive Carrier Assembly, RI7100A | Fixture Accessories | Replaced By RIK0200A No longer assembled | |
| RIK0012B | RI7100A 12 RF Fixture Top Plate | | Fixture Top Plates | Replaced By RIK0163A Matrix launches are customer specific locations. |
| RIK0012A | Test Fixture Top Plate Assembly 12RF | Fixtures | Replaced By RIK0074B Redesign | |
| RIK0011C | Universal Test Top Plate | | Fixture Accessories | Replaced By RIK0061A RI7100 Not Supported |
| RIK0011B | Universal Test Fixture - RI7100 | Fixtures | Replaced By RIK0011C Redesign | |
| RIK0011A | Universal Fixture Top Plate | | Fixture Accessories | Replaced By RIK0011B Redesign |
| RIK0010A | Fixture Top Plate, old | Fixtures | Replaced By No repla RI7100 not supported | |
| RIK0009A | Adapter, SMA(f)-SSIS(m) (qty 5) | $1,160 | Fixture Cables | 1-2 Weeks |
| RIK0008A | Adapter, SMA(f)-MCX(f) (qty 5) | Fixture Cables | Replaced By RIK0280A | |
| RIK0007B | DC Jumper Wires, 28AWG 4"+8"+12" (qty 20 ea) | $700 | Fixture Cables | 1-2 weeks |
| RIK0007A | DC Jumper Wires, 28AWG, 4"+8" (qty 20+20) | Fixture Cables | Replaced By RIK0190A RIK0191A Split into individual sizes | |
| RIK0006B | 2.5 GHz RF Switch Modules Dual SPDT (2 ea) | | Fixture Modules | Replaced By RIK0026B Revised switch device |
| RIK0006A | Switch 2.5 GHz Dual SPDT (2 ea) | Fixture Modules | Replaced By RIK0006B Revised switch device | |
| RIK0005A | RF Cable, Conform, 90° MCX(f)-90° MCX(f), 7" (qty 5) | | Fixture Cables | Replaced By RIK0194A Improved Functionality |
| RIK0004B | Test Fixture Bottom Assembly | Fixture Bottom Plates | No Replacemeent Planned | |
| RIK0004A | Test Fixture Bottom Assembly | | Fixture Bottom Plates | Replaced By RIK0004B Redesign |
| RIK0003A | Fixture Bottom Assy for GEN I and GEN II | Fixtures | No Replacemeent Planned | |
| RIK0002A | WF Cable, Flex, DIN(f)-90° MCX(m), 12" (qty 5) | | Fixture Cables | Replaced By RIK0113A Improved Functionality |
| RIK0001B | RF Cable Kit (12" SSIS(M) to MCX 90, 6 cables) -> use 80B | Fixture Cables | Replaced By RIK0080B RI7100 bottom plate no longer being built | |
| RIK0001A | RF Cable Kit (12" SSISM to MCX 90, 6 Cables) | | Fixture Cables | Replaced By RIK0183A RI7100 bottom plate no longer being built |
| RI86* | Template | CASSINI | Expired | |
| RI8612A | Device Power Plus (DP,VM,VCC) TIM | | CASSINI | |
| RI8611A | Cassini V93K CTH Infrastructure | CASSINI | 8-10 weeks | |
| RI8610A | Test Set, 86-110 GHz RR-10, 2 Ports 1 Path TIM | | CASSINI | 8-10 weeks |
| RI8609A | Cassini System Controller, Secure | CASSINI | ||
| RI8608A | Cassini System Controller, Linux | | CASSINI | |
| RI8607A | Test Set, 2-50 GHz, SSMP#12, 2 Port TIM | CASSINI | Contact Factory | |
| RI8606A | Infrastructure - Cassini SPYDER | | CASSINI | |
| RI8605A | Source Switch 2x8, 20 GHz TIM | CASSINI | No Replacemeent Planned | |
| RI8604A | Test Set, 70-86 GHz, RR-12, 2 Ports 1 Path TIM | | CASSINI | |
| RI8603A | Power Amplifier, Generic TIM | CASSINI | ||
| RI8602A | RF Measure, 71-86GHz Mixer (IF required), WR12 | | CASSINI | Replaced By RI8604 Single to Dual mmWave ports |
| RI8601A | Source, 71-86GHz Mixer (IF required), WR12 | CASSINI | Expired | |
| RI8599A | Cassini 16 Development UI with Adjustable Arms | | CASSINI | Limited Availability: 12+ weeks |
| RI8597A | Cassini 16 Development Desktop User Interface | CASSINI | Limited Availability: 12+ weeks | |
| RI8596A | RF Measure, 25 GHz DSP Receiver w/ LO TIM | | CASSINI | |
| RI8595B | Power Amplifier, 0.7-6 GHz, 20W Max TIM | CASSINI | ||
| RI8595A | Power Amplifier TIM, 0.7-2.7 GHz, 30W Nominal | | CASSINI | Replaced By RI8595B Rev B provides higher frequency range at a cost of lower max power |
| RI8594B | Time Domain Meas. (Waveform + LNC) TIM | CASSINI | Limited Availability: 12+ weeks | |
| RI8594A | Time Domain Meas. (HP Waveform) + Low Noise Clk | | CASSINI | Replaced By RI8594B Improved Phase Noise Specs on "Ultra" Low Noise Clock |
| RI8593A | EPC, Cassini Spyder Controller TIM | CASSINI | Replaced By RI8608A Never built | |
| RI8592A | Power Amplifier TIM, 0.7-2.7GHz, 16W Nominal | | CASSINI | Replaced By RI8595A added capability |
| RI8591A | Infrastructure - Cassini SPYDER, 16 TIM Slots | CASSINI | Replaced By RI8606A New design | |
| RI8590A | Ground Isolator for Handler Pods | | CASSINI,RI7100A | Replaced By RIK0266A RIK0267A RIK0263A All PODs now have Opto-Isolation built-in and 15' RIFL cable included with RIK |
| RI8589D | High Power Supply/Pulser TIM | CASSINI | Contact Factory | |
| RI8589C | High Power Supply/Pulser TIM | | CASSINI | Contact Factory |
| RI8589B | High Power Supply/Pulser TIM | CASSINI | Replaced By RI8589C The 'C' upgrades include better accuracy at high voltages and the addition of an 'HV4' negative supp | |
| RI8589A5 | High Power Supply/Pulser TIM | | CASSINI | Replaced By RI8589C The 'C' upgrades include better accuracy at high voltages and the addition of an 'HV4' negative supp |
| RI8589A | High Power Supply/Pulser TIM | CASSINI | Replaced By RI8589C The 'C' upgrades include instrument protection and better accuracy at high voltages and the addition | |
| RI8588A | Test Set - 1 Port, 68-76 GHz WR-12 TIM | | CASSINI | Replaced By RI8580B RI8560A Freq range covered by 2 newer TIMs, never built |
| RI8587A | RF Measure - 20 GHz Receiver w/ DSP TIM (Req. LO) | CASSINI | Replaced By RI8596 Internal LO, 24 GHz Range, Faster with larger DACs | |
| RI8586A | Source, 25 GHz Microwave Signal Generator TIM | | CASSINI | Limited Availability: 12+ weeks |
| RI8585A | Time Domain Meas. (Hi Perf Waveform) + Low Noise Clk | CASSINI | Expired | |
| RI8584A | Auxiliary Instrument Rack TALL (Custom) | | CASSINI | |
| RI8583A | Cassini 16 Production Touchscreen Monitor & Arm | CASSINI | ||
| RI8582A | Testset - 2 Port 1-Path, 4-40.5 GHz, w/ NF | | CASSINI | Replaced By RI8563C No longer offering Noise Figure |
| RI8581A | RF Measure - 20 GHz Receiver TIM, non-DSP (Req.LO) | CASSINI | Replaced By RI8587A Improved DSP functionality | |
| RI8580B | Test Set, 50-70 GHz, RR-15, 2 Ports 1 Path TIM | | CASSINI | |
| RI8579B | GPIB Prober POD, Isolated | CASSINI | Replaced By RIK0265A Opto-Isolation and 15' RIFL cable included | |
| RI8579A | GPIB Prober Card | | CASSINI | Replaced By RI8579B Added built-in Ground Isolation circuit |
| RI8578A | Digital Advanced Pins | CASSINI | Replaced By RI8535B Never Built | |
| RI8577A | Combiner with Amp/Attenuator, 20 GHz TIM | | CASSINI | |
| RI8576B | Auxiliary Instrument Rack (Custom) | CASSINI | ||
| RI8576A | Auxiliary Instrument Rack - OLD Short (Custom) | | CASSINI | Replaced By RI8576B Reduced Length |
| RI8575A | Phase Noise Measure, 16 GHz TIM | CASSINI | ||
| RI8574A | Cassini System Controller, ArcaOS EPC TIM | | CASSINI | Replaced By RI8608A Linux OS and USB RIFL with Cassin in Container |
| RI8573A | Test Set - 1 Port, 50-58 GHz WR-15 TIM | CASSINI | Replaced By RI8580A Never built | |
| RI8572A | Time Domain Measurement (HP Waveform) | | CASSINI | Replaced By RI8594B Added LNC |
| RI8571A | Testhead 16 Slot SAC16 | CASSINI | Replaced By RI8564A Included with RI8564 Infrastructure Cassini 16 | |
| RI8570A | EPC, Windows for DUT Control | | CASSINI | No Replacemeent Planned |
| RI8569A | Rolling Workstation Cart | CASSINI | Expired | |
| RI8568C | Infrastructure - Cassini 16 | | CASSINI | Contact Factory |
| RI8568B | Infrastructure - Cassini 16 | CASSINI | Replaced By RI8568C New Test Head "Rev C" Rotation Lock | |
| RI8568A | Infrastructure - Cassini 16 | | CASSINI | Expired |
| RI8567B | Test Set and RF Measure, 2 Port, 6/12 GHz TIM | CASSINI | ||
| RI8567A | Testset and RF Measure - 2 Port, 6 GHz TIM | | CASSINI | Replaced By RI8567B Up to 12 GHz |
| RI8566A | 4 Source Combiner with Source - 20 GHz | CASSINI | Expired | |
| RI8565A | Testset - 4 Ports, 20 GHz with Pulse | | CASSINI | Expired |
| RI8564C | Testset - 1 Port, 71-86 GHz WR-12 TIM | CASSINI | Replaced By RI8604A Dual mmWave Ports | |
| RI8564B | Testset - 1 Port, 75-81 GHz WR-12 TIM | | CASSINI | Replaced By RI8564C Internal switch components upgraded |
| RI8564A | Testset - 1 Port, 77 GHz Test Head | CASSINI | Expired | |
| RI8563D | Test Set, 4-40.5 GHz, 2 Ports 1 Path TIM | | CASSINI | |
| RI8563C | Test Set - 4-40.5 GHz, 2 Ports 1 Path TIM | CASSINI | Replaced By RI8564D Moved the RF amp from before the switch to after, so the amp only drives the doubler. Changed the ca | |
| RI8563B | Testset - 2 Port 1-Path, 4-40.5 GHz | | CASSINI | Expired |
| RI8563A | Testset - 2 Port 1-Path, 20-40 GHz | CASSINI | Replaced By RI8563C Extended Freq Range to 4-40.5 GHz | |
| RI8562A | I/Q Source Amp Combiner | | CASSINI | Expired |
| RI8561A | Video Analyzer | CASSINI | Expired | |
| RI8560A | Cassini Dual Source/Amp Combiner | | CASSINI | Replaced By RI8577A Never Built |
| RI8557A | Infrastructure - Large Cassini | CASSINI | Expired | |
| RI8556B | Infrastructure - Small Cassini | | CASSINI | Expired |
| RI8555A | Source - 6 GHz Source with Amp Attenuator | CASSINI | Replaced By RI8508C Improved functionality | |
| RI8554A | Source - 20 GHz Source with Amp Attenuator | | CASSINI | No Replacemeent Planned |
| RI8553A | RF Measure - 20 GHz Receiver (& RecLO) | CASSINI | Replaced By RI8528B RI8528B & RI7725C | |
| RI8552B0 | Handler Interface Pod - GPIB (Isolated) | | CASSINI,RI7100A,SPYDER | Replaced By RIK0263A Opto-Isolation and 15' RIFL cable included |
| RI8552B | Handler Interface Pod - GPIB (Isolated) | CASSINI,SPYDER | Replaced By RIK0263A Opto-Isolation and 15' RIFL cable included | |
| RI8552A0 | Handler Interface Pod - GPIB | | Part | Replaced By RIK0264A GPIB Isolated with RIFL Cable |
| RI8552A | Handler Interface Pod - GPIB | CASSINI,SPYDER | Replaced By RI8552A Opto-Isolation circuit added | |
| RI8551B | EPC, Controller for Cassini (NOT USED YET) | | Part | Expired |
| RI8551A | EPC (Embedded PC), Controller for Cassini Sm/Lg | CASSINI | Replaced By Cassini1 Sm/Lg Cassini no longer offered | |
| RI8549A | Testhead 8 Slot RI7100C | | CASSINI | No Replacemeent Planned |
| RI8547A | Testset - 2 Port, 6 GHz Test Head | CASSINI | Replaced By RI8546B Extended to 20 GHz | |
| RI8546C | Device Power (DP,VM,DB,VI,VCC) TIM | | CASSINI | |
| RI8546B | Device Power Module (DP,VM,DB,VI,VCC) | CASSINI | Replaced By RI8546C Improved performance and reliability | |
| RI8546A | Device Power Module (DP,VM,DB,VI,VCC) | | CASSINI | Replaced By RI8546B Improved reliability |
| RI8545C | Test Set, 20 GHz, 4 Port TIM | CASSINI | ||
| RI8545B | Testset - 4 ports, 20 GHz Test Head | | CASSINI | Replaced By RI8545C New one is thinner, allowing adjacent T-Location to be used. |
| RI8545A | Testset - 4 ports, 12 GHz Test Head | CASSINI | Replaced By RI8545B Extended to 20 GHz | |
| RI8542A | Low Phase Noise Source and Measure, 6 GHz | | CASSINI | Replaced By RI8555A RI8528B Split into two TIMs |
| RI8536A0 | Source: Amp Attenuator | CASSINI | Replaced By RI8577A Upgrade to Cassini 16 | |
| RI8536A | SmCassini Src Amp Atten | | CASSINI | Expired |
| RI8535B4 | 40 Pin FSPU Digital TIM | CASSINI | Replaced By RI8535B- Model number change. | |
| RI8535B2 | Universal Digital, 20 Pins TIM | | CASSINI | 12+ weeks (limited) |
| RI8535B1 | Universal Digital, 40 Pins TIM | CASSINI | 12+ weeks (limited) | |
| RI8535B0 | 80 Pin FSPU Digital TIM | | CASSINI | Replaced By RI8535B No changes made, model number clarification. When nothing is specified, assume 80 min (Dpins1-4) |
| RI8535B-80 | 80 Pin FSPU Digital TIM | CASSINI | Replaced By RI8535B Assume 80 pin in base model (otherwise, specify -40 or -120) | |
| RI8535B-40 | 40 Pin FSPU Digital TIM | | CASSINI | Replaced By RI8535B1 Consistent with Model Number in PARTS |
| RI8535B-20 | 20 Pin FSPU Digital TIM | CASSINI | Replaced By RI8535B- No longer offering 20 pin version | |
| RI8535B-120 | 120 Pin FSPU Digital TIM | | CASSINI | Replaced By RI8535B Never ordered |
| RI8535B | Universal Digital, 80 Pins TIM | CASSINI | 12+ weeks (limited) | |
| RI8535A | FSPU Digital TIM (40/80/120) | | CASSINI | Replaced By RI8535B- RI8535B- RI8535B- Model numbering change to represent number of pins |
| RI8528B | RF Measure - 20 GHz Receiver | CASSINI | Replaced By RI8528B Improved Functionality | |
| RI8528A | RF Measure - 20 GHz Receiver | | CASSINI | Replaced By RI8528B Improved Functionality |
| RI8521C | Time Domain Measurement (Waveform) | CASSINI | Replaced By RI8572A Improved Functionality | |
| RI8521B | Time Domain Measurement (Waveform) | | CASSINI | Replaced By RI8572A Improved Specifications |
| RI8521A | Time Domain Measurement (Waveform) | CASSINI | Replaced By RI8572A Improved Specifications | |
| RI8517B | Handler Interface Pod - Parallel (Isolated) | | Part | Replaced By RIK0267B Bundled with RIFL cable and Opto-Isolated |
| RI8517A1 | Handler Interface Pod - Parallel | Part | Replaced By RIK0267B Bundled with RIFL cable and Opto-Isolated | |
| RI8517A0 | Handler Interface Pod - Parallel | | Part | Replaced By RIK0267B Bundled with RIFL cable and Opto-Isolated |
| RI8517A | Handler Interface Pod - Parallel | CASSINI | Replaced By RIK0267B Opto-Isolation and 15' RIFL cable included | |
| RI8516B | Handler Interface Pod - Serial with Opto-Isolation | | CASSINI | Replaced By RIK0266A Opto-Isolation and 15' RIFL cable included |
| RI8516A | Handler Interface Pod - Serial | Part | Replaced By RIK0266A Isolated with 15' RIFL Cable | |
| RI8508C | Source, 6 GHz Microwave Signal Generator TIM | | CASSINI | |
| RI8508B | 6 GHz Digitally Modulated Signal Generator TIM | CASSINI | Replaced By RI8508C Improved Specifications | |
| RI8508A | 6 GHz Digitally Modulated Signal Generator TIM | | CASSINI | Replaced By RI8508B Improved specifications |
| RI8502B0 | GPIB Instrument Pod I/0 (RIFL II) Isolated | CASSINI | Replaced By RIK0264A Opto-Isolation and 15' RIFL cable included | |
| RI8502B | GPIB Instrument Pod I/0 (RIFL II) Isolated | | CASSINI | Replaced By RIK0264A Opto-Isolation and 15' RIFL cable included |
| RI8502A0 | RIFL to GPIB Instrument Pod I/0 | Part | Replaced By RI8502B Opto Isolation added | |
| RI8502A | GPIB Instrument Pod I/0 (RIFL II) | | CASSINI,RI7100A | Replaced By RI8502B revised to B to add opto isolation |
| RI8501B | RIFL Master | Part | ||
| RI8500A0 | HUB Ri8500 | | Part | Expired |
| RI8002A | RF Pulse Profiling | CASSINI | Replaced By RI8565A Added to TestSet TIM model | |
| RI8001A | High Power X Band Amplifier Module | | CASSINI | No Replacemeent Planned |
| RI7725C | Source - 20 GHz Microwave Signal Generator | CASSINI | Replaced By RI8586A Extended Freq Range to 24 GHz, +30 dB Power (shifted dynamic range), Faster set and settle times, im | |
| RI7725B | Source - 20 GHz Microwave Signal Generator | | CASSINI,RI7100A | Replaced By RI7725C Component updates, no performance changes |
| RI7725A | Source - 20 GHz Microwave Signal Generator | CASSINI | Replaced By RI7725B Component updates, no performance changes | |
| RI7710G | RF Signal Generator | | RI7100A | Replaced By RI8586A Cassini 24 GHz Src |
| RI7710A | RF Signal Generator | RI7100A | Expired | |
| RI7323A | RF Measure - 20 GHz Receiver | | CASSINI | Replaced By RI8528B Source parts no longer available, move to Cassini16 platform ASAP |
| RI7322J0 | Receiver "J" | Part | Expired | |
| RI7269A | Src 1/2 Combiner, Aux2 in, Dual 6GHz Amps, 3db Pad | | CASSINI,RI7100A | No Replacemeent Planned |
| RI7261A | Source 1/2 combiner module, Aux2 in, No Amps | CASSINI | No Replacemeent Planned | |
| RI7260D | Source 1/2 combiner module, Aux2 in, Dual 6GHz Amps | | CASSINI | No Replacemeent Planned |
| RI7260B | Source 1/2 combiner module, Aux2 in, Dual 6GHz Amps | CASSINI | Replaced By RI7260D Updated specs | |
| RI7260A | Source 1/2 combiner module, Aux2 in, Dual 6GHz Amps | | CASSINI | Replaced By RI7260D Updated specs |
| RI7100A_RITS | Requires RI7100A Fixture interface | RITS | No Replacemeent Planned | |
| RI7100A | RFIC ATE System | | System | Replaced By CASSINI Next generation modular ATE improves on all RI7100A functionality. |
| PTS | Production Technical Support - 1 Year | RI7100A | 4-6 weeks | |
| PSR | Phone Support for Service & Repair - 1 Year | | RI7100A | |
| PMPC | Preventive Maintenance & Calibration - 1 Visit, RI7100A | RI7100A | 4-6 weeks | |
| PEDESTALS | Pedestal Designs | | Part | 4-6 weeks |
| PA-CASSINI | Power Amplifiers | Application | ||
| OSR | On Site Repair - 1 Year | | RI7100A | 4-6 weeks |
| N0E5GP4A | Jariet Probe Card Assembly | Part | 4-6 weeks | |
| MZYB336A | Cart for Cassini V93K CTH Infrastructure | | Part | 4-6 weeks |
| MZRFFX6A | Fixture Air Supply Quick Disconnect | Part | 4-6 weeks | |
| MZR6536A | WG Cable E band Top Hat RX | | Part | 4-6 weeks |
| MZR64T6A | WG Cable E Band Top Hat TX split for 2" long attenuator | Part | 4-6 weeks | |
| MZA2Y56A | WG Cable 185 V Band, TOP HAT 1550 DUT WG1 | | Part | 4-6 weeks |
| MZ8B566A | Cassini WG Socket Calibration Assembly | Part | 4-6 weeks | |
| MZ8B2F6A | Open DIB Dock, Cohu Stiffener Plate Assembly | | Part | 4-6 weeks |
| MZ8B1M6A | Engage WG Insert, 50-70GHz RR15 Prober, Gold | Part | 4-6 weeks | |
| MZ1HCN6A | WG 1 V-Band Top Hat DUT 1455 | | Part | 4-6 weeks |
| MZ1EXX1A | WG 1 V-Band Top Hat DUT 1355 | Part | 4-6 weeks | |
| MYZLXY6A | Wolfspeed RF/DC Tel Prober Docking Kit | | Part | Expired |
| MYUAN36A | Bracket Assy, control board ADI V band | Part | 4-6 weeks | |
| MYTB4S1A | Fixture Lock Switch | | Part | 4-6 weeks |
| MYNCFK4A | Joist Pin Assembly | Part | 4-6 weeks | |
| MYLN566A | WG 138 UG387-UG387 RX | | Part | 4-6 weeks |
| MYLN4R6A | WG 138 UG387-UG387 TX | Part | 4-6 weeks | |
| MYH6W86A | Coax Cable Assembly, SSMP GPPO(M) bulkhead screw ub ti 2,9mm (M) fkex | | Part | 4-6 weeks |
| MYGYX26A | Waveguide RR-12 to UG-385U - E Band Top Hat DIB # 2 | Part | 4-6 weeks | |
| MYGYWT6A | Waveguide RR-12 to UG-385U - E Band Top Hat DIB # 1 | | Part | 4-6 weeks |
| MYGJAR4A | OBR-138, UG387 - UG387 360 deg Bend, 8" | Part | 4-6 weeks | |
| MYFG814A | OBR138 , UG387, ADI 2.5" sTRAIGHT | | Part | 4-6 weeks |
| MYAH5A4A | Harness, Fixture Power Breakout | Part | 4-6 weeks | |
| MY9PMU6A | Waveguide RR-15 to UG-385U - V Band Top Hat DIB # 2 | | Part | 4-6 weeks |
| MY9PMJ6A | Waveguide RR-15 to UG-385U - V Band Top Hat DIB # 1 | Part | 4-6 weeks | |
| MXVESC4A | Open Fixture, Quad Top Side Covers | | Part | Contact Factory |
| MXUT4W4B | USB EPC Remote TIM | Part | 4-6 weeks | |
| MXUT4W4A | USB EPC FRB Remote TIM | | Part | Replaced By MXUT4W4B Improved Design |
| MXTPVK1A | Two-Head Open-Ended Wrench, 1/4" and 5/16" | Part | 4-6 weeks | |
| MXTJ626A | WG Interposer Assy | | Part | 4-6 weeks |
| MXP5GP4A | 50 GHz Cal Assembly | Part | 4-6 weeks | |
| MXP5FM1B | ADI Bottom Plate7_87GHz | | Part | 4-6 weeks |
| MXMHJ36A | Pedestal Support Assy | Part | 4-6 weeks | |
| MXA4EW4A | Coax, Semi rigid Low Loss,2.9mm(M)-2.9mm(M), 12" Jacketed | | Part | 4-6 weeks |
| MX8ULACA | Waveguide RR15 V-Band (T16 Port2 DUT B) | Part | 4-6 weeks | |
| MX8ULA6A | Waveguide RR15 V-Band (T16 Port1 DUT A) | | Part | 4-6 weeks |
| MX8UJN6A | Waveguide Blind Mate Launch Mounting Assembly | Part | 12+ weeks (Limited) | |
| MX610G6A | Ampleon DIB FIX Test Plate Assy | | Part | 4-6 weeks |
| MX37AZ1A | Termination, Precision, 50GHz, 2.4.mm, OSL | Part | 4-6 weeks | |
| MX37AW1A | Short, Precision 50GHz 2.4mm, OSL | | Part | 4-6 weeks |
| MX37AR1A | Open, Precision, 50GHz , 2.4mm, OSL | Part | 4-6 weeks | |
| MWN9M74A | SMA MALE TO MMPX R/A PLUG 6" | | Part | 4-6 weeks |
| MWM6YW6A | SSMP Raised Floating Launch | Part | 4-6 weeks | |
| MW92ZE1B | Cal Standards 50 - 70GHz | | Part | 4-6 weeks |
| MW3ZER5A | Bearing Assembly UBAR | Part | 4-6 weeks | |
| MVRPPV1A | Test Head Rotation Lock (Rev C) Retrofit Kit | | Part | Contact Factory |
| MV58H94B | ADI TX (bottom) rr12 to UG387, Obround 138 | Part | 4-6 weeks | |
| MV56HU4B | ADI TX (top), UG387 to UG387, Obround 138 | | Part | 4-6 weeks |
| MV1JCR1A | UG387-RR12 Transition Block | Part | 4-6 weeks | |
| MURKK91A | Upgrade Kit, Add Src3 to Aux Rack | | Part | 4-6 weeks |
| MUHKYV6A | Fixture Block RR12B | Part | 4-6 weeks | |
| MUF6524A | S1 Hypertronic Fixture Block Assembly | | Part | 4-6 weeks |
| MU544H5B | Assy, Attn 30db 50W for Ri8595B | Part | 4-6 weeks | |
| MU3JU94A | Noise Source NW346Ka (20 dB) | | Part | 8 weeks |
| MU100L6B | TX WG line split in two for attenuator | Part | 4-6 weeks | |
| MU0NAP1A | COAX, #12F special - #12F Special 18" | | Part | 4-6 weeks |
| MU00RG6B | ADI E band TX-RX cal WG thru cable | Part | 4-6 weeks | |
| MTY95R1B | Cal Standards 60-90GHz WR12 | | Part | 4-6 weeks |
| MTTEA56C | ADI RX, rr12 ro UG387,Obround 138 | Part | 4-6 weeks | |
| MTTEA56B | RX WG | | Part | 4-6 weeks |
| MTSBBG4B | Loop Assembly, Obround | Part | 4-6 weeks | |
| MTRNHH4A | Cable, #12F - #12 F 12" | | Part | 4-6 weeks |
| MTR62W1A | Power Sensor Agilent E8486A/100 - 60 - 90GHz | Part | 6 weeks | |
| MTL2XF6A | WG Block Fixture w WG & PKZ holders | | Part | Expired |
| MTB5HA4B | Diagnostics/Interface Kit Ampleon | Part | 4-6 weeks | |
| MTB5HA4A | Ampleon Diag Kit | | Part | Replaced By MTB5HA4A Updated cables/Atten/more... |
| MSZ1GU4A | Harness FET Pulser TIM Block (Custom ADI) | Part | 4-6 weeks | |
| MSPE434A | PCB Stiffener For 11 inch Round Probe Card | | Part | |
| MSBVK71A | Cal Standards, 40 GHz, w box & SSIS adapt | Part | ||
| MRYXF91A | Multiplier/AMP WR15 50-70GHz | | Part | 4-6 weeks |
| MRYV7G2A | VVA, WR15, 60-90GHz | Part | 4-6 weeks | |
| MRNNW04A | DC Cable Assembly | | Part | |
| MRLWK91A | Calibration Kit 80 GHz add-on Cal Kit | Part | 4-6 weeks | |
| MR5CCB1A | Guru Server Rack (KVM, Switch,Routing) | | GURU-SRV | Expired |
| MPV2385B | DC Pigtail Harness, FSP, TIM Slot 3 | Part | ||
| MPV2385A | DC Pigtail Harness, FSP, TIM Slot 3 | | Part | |
| MPSNYT5A | Air Adapter Kit | Part | 4-6 weeks | |
| MPG9M41A | Assy, Attn 30dB 50W for RI8595A AMP Cal | | Part | 4-6 weeks |
| MP6WRP3B | Hms, BVD to Bna, 72", 4DP w/Kill + 4 VCCs | Part | 4-6 weeks | |
| MP6WRP3A | Harness, BVD to Banana, 72", 4DP Interface w/Kill + 4 more Vcc | | Part | |
| MP6WRN1A | Harness, SpeakOn to Banana, 72", For Freescale PA | Part | ||
| MP38HS1A | ATTN, 20 db, 20 Watt, 20 GHz | | Part | |
| MNXZC24B | Roos Support Tablet (Apple iPad) | Part | 4-6 weeks | |
| MNXEHK4A | Spanawave formerly Gigatronics 20954-001 Power Sensor Cable 1.5 meters (5 feet) | | Part | 4-6 weeks |
| MNKT711A | CABLE HIGH SPEED DIGITAL SHIELDED EQCD M-F 40 CONDUCTOR 36" | Part | 4-6 weeks | |
| MNA43L1A | SSMP MALE STRAIGHT SURFACE MOUNT WITHOUT DETENT | | Part | 4-6 weeks |
| MN60KF1B | COAX, CONFRM,.085,SMAM-SSMPF(90) (GPPO) 7" | Part | ||
| MN60GB5A | UPSectomy Kit (adds pulizzi) | | Part | |
| MLYM9G1A | Coax, Semi-Rigid, 2.9mm(m)-2.9mm(m), 6.0" | Part | 4-6 weeks | |
| ML750B1B | Step Atten, 110 dB, 20 GHz | | Part | Expired |
| ML750B1A | Step Atten, 110dB, 20GHz | Part | Expired | |
| ML5EHB1A | Short WG Adapter for Power Meter | | Part | 4-6 weeks |
| ML16U24A | Cassini Split BVD, Conformable Cable 17" | Part | 4-6 weeks | |
| MKZGFA1A | TIM pogo Block Assembly | | Part | 4-6 weeks |
| MKP5NX1A | UBAR Assembly, | Part | 4-6 weeks | |
| MKK99K1A | Hose Coupling 1/4NPT female thread | | Part | |
| MKGUEV3A | Cable, #12F-MCXM 20" | Part | 4-6 weeks | |
| MJHX773A | Power Sensor 0.5-50GHz , -30 to +20 dBm | | Part | 4-6 weeks |
| MJH3CP3A | Transfer Switch, 18GHz, SMA, 28V | Part | 4-6 weeks | |
| MJ7F7A3A | WR12 H-Bend (90) | | Part | 4-6 weeks |
| MJ7F4W3A | Power Sensor Agilent V8486A - 50 - 75GHz | Part | 7 weeks | |
| MJ6JLT3B | COAX, CONFRM, #12F-SMAM, 18" | | Part | 4-6 weeks |
| MHFREC1A | 20RF Fixture Bottom Plate, Carrier and Sides | Part | Expired | |
| MHFE0A1A | Cable, High Speed Digital, Fixture Side, 40 pins, 20" | | Part | |
| MHABJH1A | Power Divider, Combiner .5 - 20GHz | Part | 4-6 weeks | |
| MH5ZTJ1B | COAX, CONFRM, #12F-SMAM 8" | | Part | |
| MGY36J1B | Coax 1x3 to 1x3 16" shielded Twisted Pair, Ground | Part | 4-6 weeks | |
| MGS52L1A | Exchange Reference Loop Board (A3) for MG3692B | | Part | 4-6 weeks |
| MGK1WC1A | Dry Air Dual Site Assembly | Part | 4-6 weeks | |
| MGGKAU1A | 800 W, 48V MODULE W/ I2C | | Part | 4-6 weeks |
| MG2ZTS1A | SCREW, FLAT PHIL, 10-32 X 3/8", SS | Part | 4-6 weeks | |
| MFSHLX1A | Handler Cable, 14' DSUB 25pin Pigtail w/ Connector | | Part | |
| MFN6XR1A | Coax, Q-flex plus, 90° mcx-mcx 12" | Part | 4-6 weeks | |
| MFA8CZ1A | ATTN, 6 db 2 Watt SMA | | Part | 4-6 weeks |
| MF4ZEX1A | ATTN, 3 db 2 Watt SMA | Part | 4-6 weeks | |
| MF0BR81A | Receiver Upgrade Exchange | | Part | 4-6 weeks |
| MEMS-CASSINI | RF MEMS Devices | Application | ||
| MEGPZ71A | COAX, Q-FLEX Plus, SSISM-SMAM 11" (SSISM) | | Part | 4-6 weeks |
| MECSST1A | DC Harness, BVD(f) to pogo(f) | Part | 4-6 weeks | |
| MEBPAC1A | Coax, Q-flex plus, 90° mcx-SMAM 5" | | Part | 4-6 weeks |
| ME97F01A | Cable High Speed Digital Shielded EQCD M-F 40 Conductor 12" | Part | 4-6 weeks | |
| ME873H1A | LNA, 2.9dB NF, 24dB Gain | | Part | 4-6 weeks |
| ME873G1A | Combiner, 0.002 - 60 MHz | Part | Expired | |
| ME873C1A | Mixer 0.05 - 300 MHz | | Part | 4-6 weeks |
| ME | Fast Ship Module Exchange - 1 year | RI7100A | ||
| MCRH7Z1A | Coax, Q-flex plus, 90° mcx-mcx 5" | | Part | 4-6 weeks |
| MBH0VH1B | PKZ #12(f) to SMA(f), Adapter, Cal/Diag | Part | 9 weeks | |
| MB3L2N1A | RIFL2 Cable, CAT5 Shielded, 14' Red | | Part | 4-6 weeks |
| MB06Y41A | RI7100A Pogo Pin - QTY1 | Part | ||
| MAEKR61A | Battery kit for UPS | | Part | 4-6 weeks |
| MA6S6M1A | AC Line Cord | Part | 4-6 weeks | |
| MA662W1A | Conductive Elastomer round .071 Dia, 1" | | Part | 4-6 weeks |
| M9Z7TP1A | Hose, Blue Vinyl, 54" long | Part | Expired | |
| M9TUB41A | LNA, 0.1 to 20 GHz Assy | | Part | 4-6 weeks |
| M9CLV51C | Fixture, Bottom Interface, 7100 | Part | 4-6 weeks | |
| M96JBB1A | Amplifier, 0.5 to 4 GHz, 1 W, w/ 10 pin header | | Part | Expired |
| M8VX051A | Switch, MMIC | Part | 4-6 weeks | |
| M8SHHL1A | Source Repair | | Part | 4-6 weeks |
| M8M1KL1A | Synthesized CW Generator, 2 - 20 GHz | Part | Expired | |
| M8ERKE1A | Amplifier, 0.5 to 4 GHz, 1 W | | Part | Expired |
| M8AHFG1A | A3 Reference Loop (RI7710G) MG3692A | Part | Expired | |
| M87MZL1A | Switch, 20 GHz, 4 Port , 4 F, Pin | | Part | 4-6 weeks |
| M86K641C | Mechanical Relay, 20 GHz | Part | 4-6 weeks | |
| M86K5F1A | Switch, SPDT R Pin, 0.1 - 20 GHz | | Part | 4-6 weeks |
| M86K4Z1A | Switch, 20 GHz, 4 Port, 2 F/ 2 M, Pin | Part | 4-6 weeks | |
| M86K4N1A | Attenuator, Step, Pin | | Part | 4-6 weeks |
| M86K411A | Noise Source, Internal | Part | 4-6 weeks | |
| M81YH32A | A10 AM Mod Option Board | | Part | Expired |
| M7CJ2B2A | Power Sensor, Gigatronics 80301A 10MHz - 18GHz, -70 to - +20 dBm, N(m) | Part | 4 weeks | |
| M7CJ222A | Spanawave/Gigatronics Power Meter 8541C w/ Cert and Cable 1.5m (5 feet) | | Part | 4-6 weeks |
| M6WJ4T1A | Power Cord F to M | Part | Expired | |
| M6LPZJ1A | Noise Source, Calibration Standard | | Part | 4-6 weeks |
| M6GSFN1A | ATTN,6db 2W SMA | Part | Expired | |
| M6GSCE1A | RF/Microwave Coupler, 10db | | Part | |
| M6GSBX1B | Step Atten, 110 dB, 20 GHz | Part | 4-6 weeks | |
| M6GSBX1A | Step Atten, 110 dB, 20 GHz, Purchase | | Part | Expired |
| M6G8JZ1A | ATTN,3db 2W SMA | Part | Expired | |
| M64E5U1C | Relay, 20 GHz | | Part | |
| M64E5R1A | Switch, SPDT R Pin, 0.01 - 12 GHz | Part | 4-6 weeks | |
| M64CWG1B | RIFL1 Cable, 5 Meter | | Part | Expired |
| M64CW91A | RIFL1 Cable, 3 Meter | Part | Expired | |
| M64CUF1A | RIFL1 Cable, 1 Meter | | Part | Expired |
| M5WNBC1A | BNC M to M | Part | 4-6 weeks | |
| M5R1NU1A | High Current Pins | | Part | 4-6 weeks |
| M5PZ051A | Switcher +5/+28 VDC | Part | Expired | |
| M5PZ031A | Switcher +15/+15 VDC | | Part | Expired |
| M5PZ001A | Switcher +5/-12/+12 VDC | Part | Expired | |
| M5PJG41A | Coax SMA M to SMA M 12' | | Part | 4-6 weeks |
| M5PJG01A | COAX, CONFRM, SMAM-SMAM 10" | Part | 4-6 weeks | |
| M5PJFW1A | COAX, CONFRM, SMAM-SMAM 8" | | Part | 4-6 weeks |
| M5PJFN1A | COAX, CONFRM, SMAM-SMAM 5" | Part | 4-6 weeks | |
| M5CH1B0C | COAX, CONFRM, SMAM-SMAF 5.0" | | Part | 4-6 weeks |
| M5CH190B | Coax SMA M to SSIS M 10" | Part | 4-6 weeks | |
| M029U16A | Prober Docking Adapter Plate ASSY | | Part | 4-6 weeks |
| HOURS_TST | Test Data Collection Service | Part | 4-6 weeks | |
| HOURS_ENG | Engineering Services | | Part | 4-6 weeks |
| HNDPLATE | Custom Adapter Plate for RI Large Handler Dock | Part | 12 weeks | |
| GURU-SU | Software Updates for Guru System, Additional Year | | GURU-SRV | |
| GURU-SRV | Guru Server and 1 Yr Support | System | ||
| GURU-HW | Hardware Warranty Extension for Guru System, Additional Year | | GURU-SRV | |
| GTJ17G2A | ATTN,6dB, MCX(m)-MCX(f) 2W | Part | 4-6 weeks | |
| GGGHA02A | DC Block, 14 in. Cassini Fixture | | Part | Expired |
| GGFEH22B | RIFL3-RIFL2 Cable - Cassini POD 15 ft./4.5m | Part | Limited Availability: 12+ weeks | |
| GGFEH22A | Cable, RIFL3-RIFL2, 180" | | Part | Replaced By GCFEH22B Added metal collet |
| GGFEGW2B | 84" RIFL3-RIFL2 Cable | Part | 4-6 weeks | |
| GAN-CASSINI | GaN Devices | | Application | |
| G9XV672A | Adapter SMA Jack-Plug 90° | Part | 4-6 weeks | |
| G9SFMT2B | COAX, CONFRM, #12M - SMAM 18" Spring Coax | | Part | 4-6 weeks |
| G9B4MH2A | MCX Jack to Jack Adapter | Part | 4-6 weeks | |
| G9AKWA2A | Adapter, 2.9mm(f)-2.9mm(f) K Conn | | Part | 4-6 weeks |
| G96VGV2A | Adapter, MCX Jack SMA Jack | Part | 4-6 weeks | |
| G8UZL32A | RIFL2 Cable (RJ45) - RI7100A SysController to Hub - 15' | | Part | |
| G8KV122A | Digital Pogo Pin, 1 pin | Part | 4-6 weeks | |
| G8ERSH2A+ | Down Converter, Purchase | | Part | Expired |
| G8ERSH2A | Down Converter, Exchange | Part | Expired | |
| G89TCL2A | RIFL2 Cable (RJ45) - RI7100A to Handler POD - 7' | | Part | |
| G889X02A | RIFL2 Cable (RJ45) - RI7100A Instruments to Hub - 3' | Part | ||
| G87K632A | Mixer, Even Harmonic 40GHz | | Part | |
| G7X09E2A | Step Atten, 110 dB, 20 GHz, Exchange | Part | Expired | |
| G7E3AA2A | 2 Yr. Cal Cycle for Z540 Calibration for SC5224 Cal kit | | Part | Service (N/A) |
| G797EX2A | A5 PCB Fine Loop | Part | Expired | |
| G7181Z2A | RIFL2 Cable, 2' (Handler Cable) | | Part | 4-6 weeks |
| G6T7XP2A | A11 FM/PM Option Board | Part | Expired | |
| FRP | Factory Replacement Parts - 1 year | | RI7100A | |
| FIXTURE | Fixture - the Custom Testhead | CASSINI | Expired | |
| ETS | Engineering Technical Support Upgrade - 50 hrs | | CASSINI | 12+ weeks (limited) |
| ELTH8M1A | Power Sensor 40GHz, 2.9mm, Spanawave/Gigatronics 80324A | Part | 4-6 weeks | |
| E-W | Extended Warranty | | | With Support Renewal |
| E | Engineering Technical Support (50 Hrs) | CASSINI | Replaced By ETS Equivalent service, alternate Product ID | |
| CUSTOM | Co-development with Customer IP | | CASSINI | |
| CASSINI_8 | Requires CASSINI TIMs & 8 port Fixture interface | RITS | No Replacemeent Planned | |
| CASSINI_16 | Requires CASSINI 16 TIMs w/ 16 port Fixture Interface | | RITS | No Replacemeent Planned |
| CASSINI | Cassini Modular Automated Test Equipment | System | ||
| CAS004A | System Integration of TIMs and Cal Fixture | | CASSINI | |
| BACK-CASSINI | Base station or Backhaul (High Power) | Application | ||
| AUTO-CASSINI | Automotive Radar | | Application | |
| ATTKHP5A | Hardware for Matrix Fixture, Side Plates, Cassini 16 Slot | Part | 1-2 weeks | |
| ASSJEY5A | SMA Torque Wrench, Click, 5/16 bit 8.85in-lbs. | | Part | 4-6 weeks |
| AP57ZJ3A | S3 HYP Head Block Kit | Part | ||
| ANF06P3A | Receiver Upgrade Exchange (81A -> 87A) | | Part | |
| AEPMS62A | GPIB Custom Software Driver | Part | 4-6 weeks | |
| AANH632A | Mini Keyboard w/Touch pad | | Part | |
| A8BNV93A | A7 Yig Loop | Part | Expired | |
| A7G5064B | Cable, #12F - #12F 16" | | Part | 4-6 weeks |
| 5G-CASSINI | 5G Devices | Application | ||
| 4G-CASSINI | 4G (LTE, WiMAX) Devices | | Application | |
| 2D26N6A3 | High Current Driver (3.0A Bias) | Part | Expired | |
| 2CAJ23A1 | Digitizer Input (Video Mux Board) | | Part | Expired |
| 14CYUWB1 | ICC Driver (16 Bit DAC) | Part | Expired | |
| 10B84HA1 | Arbitrary Waveform Synthesizer | | Part | Expired |
| 038A | Guru Client | RI7100A | Expired | |
| 037A | Low Loss for Source1/Support for 2 Auxillary Inputs | | RI7100A | Expired |
| 036A | DPVP (Parametric Measure for DP Lines) | RI7100A | Expired | |
| 035A | Parallel Port (for local Printer) | | RI7100A | Expired |
| 034A | VCC7 and VCC8 | RI7100A | Expired | |
| 033A | LRM On-Wafer Calibration Support | | RI7100A | Expired |
| 032A | Add Counter/Timer to H.S. Dual Digitizer | RI7100A | Expired | |
| 031A | Assurance of Quality (AOQ) Test Methodology | | RI7100A | Expired |
| 030A | 230V 50-60 Hz Single Phase (International) | RI7100A | Expired | |
| 029A | High Speed Dual Digitizer Upgrade | | RI7100A | Expired |
| 028A | Source 2 routed to RF8 | RI7100A | Expired | |
| 027A | Bar Code Scanner | | RI7100A | Expired |
| 026A | High Speed Dual Channel ARB Upgrade | RI7100A | Expired | |
| 025 | Extend Frequency Range to 12 GHz | | RI7100A | Expired |
| 024 | CIM Cell Interface Software | RI7100A | Expired | |
| 023 | Bit Error Rate (BER) Measurement Capability | | RI7100A | Expired |
| 022 | Low Phase Noise Receiver LO Upgrade | RI7100A | Expired | |
| 021 | Database Server System | | RI7100A | Expired |
| 020 | Source Code for Test System Software | RI7100A | Expired | |
| 019 | 2nd Mixer LO Stimulus Source (RF Source 4) | | RI7100A | Expired |
| 018 | High RF Output Pwr and RF Atten for Src 3 | RI7100A | Expired | |
| 017 | On-site Service Parts Kit | | RI7100A | Expired |
| 016 | Dual RF Atten & Combiner Module Src 3 & 4 | RI7100A | Expired | |
| 015 | Ping Pong Multi-site Testing | | RI7100A | Expired |
| 014 | Extend Frequency Range to 20 GHz | RI7100A | Expired | |
| 013 | Additional High Current Bias Supply Lines | | RI7100A | Expired |
| 012 | Extended Low Current Capability for DBVP | RI7100A | Expired | |
| 011R5 | 6 GHz Digital Modulation Signal Generator | | RI7100A | Expired |
| 011R4 | 4.4 GHz Digital Modulation Signal Generator | RI7100A | Expired | |
| 011B | 6.0 GHz Digital Modulation Generator | | RI7100A | Expired |
| 011A | 2.75 GHz Digital Modulation Signal Generator | RI7100A | Expired | |
| 010 | Adjacent Channel Power Measurements | | RI7100A | Expired |
| 009 | RF Pulse Profiling/Time Domain | RI7100A | Expired | |
| 008 | High RF Input Power for RF 6 (+40 dBm ) | | RI7100A | Expired |
| 007 | High RF Output Power for Primary RF Src | RI7100A | Expired | |
| 006B | Frequency & Phase Modulation On Src 1 | | RI7100A | Expired |
| 006A | Ampl. & Freq. Modulation On Src 1 | RI7100A | Expired | |
| 006 | Ampl. Freq. & Phase - RI7710G Src | | RI7100A | Expired |
| 005 | Time Domain Capability | RI7100A | Expired | |
| 004 | Mixer LO Stimulus Source (RF Source 3) | | RI7100A | Expired |
| 003 | Intermod Measurement Capability (incl. RF Source 2) | RI7100A | Expired | |
| 002 | Wafer Test Executive | | RI7100A | Expired |
| 001 | Production Test Options (incl. parallel handler pod) | RI7100A | Expired |
Item has been added to cart. Subtotal $200.